Windows Enterprise Desktop

Sep 4 2019   12:41PM GMT

Technology Advances Require Basic IP Address Understanding

Ed Tittel Ed Tittel Profile: Ed Tittel

Tags:
IP address management
Router IP address
Windows 10
Wireless Access Points

OK, then. A couple of weeks ago, my 6-year-old ASUS RT-68U started getting flaky on me. What does that mean? It means it began losing its configuration settings on the 5 GHz band with the Windows 10 PCs it served. How do I know this? Because network status shifted from Private to Public and wouldn’t respond to normal Win10 methods to reverse that setting. At first, I suspected issues with Hyper-V (but that proved irrelevant). Next, I wondered about ISP issues (Spectrum’s usually excellent diagnostic tools found nothing wrong). Interestingly, the RT-68U worked fine on the 2.5 GHz channel and only improperly on the 5 GHz channel. Thus, I reluctantly diagnosed intermittent failure and decided to purchase a replacement. Configuring that new device, I realized that technology advances require basic IP address understanding.

Why Do Technology Advances Require Basic IP Address Understanding?

Just as the RT-68U I’m replacing is actually a full-fledged router as well as a Wi-Fi device, so also is the RT-AX6000 that replaces it. At first, I couldn’t get to the AX6000 at all, even with a direct, wired RJ-45 connection to the device from one of my laptops. So I did two things — and presto, my problems became solvable. First, I chatted with Spectrum and got them to add the MAC address and serial number for my AX6000 to their device whitelist table. Second, I chatted with ASUS and learned that, in addition to plugging directly into a switch port (not the Internet modem port) I could access the device at IPv4 address 192.168.1.1.

Technology Advances Require Basic IP Address Understanding.ipconfig

Sure, the ASUS guy on the phone said 192.168.1.1, but it turns out to be 192.168.50.1. No matter! As long as I know what it is, I can — and did — get there to make my configuration changes.

Actually, my next reboot occurred with a laptop plugged into a switch port and the AX6000 disconnected from the LAN. IPCONFIG showed me the Default Gateway address was 192.168.50.1. No matter: with that information in hand, I was able to access the router page using that address via Chrome on the attached PC. From there, I selected the “Wireless Access Point” configuration option, and I was off to the races.

All’s Well, and Ends Well

I’ve now got the AX6000 humming along, offering wireless access to the half-dozen-plus wireless devices here at the house. (That includes 5 laptops, 1 All-in-One, 1 iPad, and 3 iPhones.) It is pretty fast, too. I just got 450 Mbps-plus downstream, and about 45 Mbps upstream through Ookla Speedtest. That’s to my closest ISP (Suddenlink, in Georgetown, TX, 8 miles away). This came courtesy of my X1 Extreme, and its built-in Intel Wireless AC-9650 NIC, operating at 160 MHz (first time I’ve seen that option show up in the network selection criteria).

The ASUS documentation says things will run even faster if I install a new Intel driver designed to work with 802.11ax frame buffers. I think I’ll have to check that out next . . . Stay tuned!

Note Added August 5

I’ve checked the ASUS documentation about drivers. It says that PCs running various models of the Intel adapters — including my dual-band Wireless AC-9650 — should be running version 20.70.0 or higher. Mine’s running 21.10.1.2 and is offering the 160 MHz option, so my X1 Carbon is already up-to-date. My other wireless adapters are too old to take advantage of this higher-level service, except for the Yoga X380 (and it’s au courant as well, but does not show the 160 MHz option).

 Comment on this Post

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when other members comment.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

Share this item with your network: