• Is it possible to lift router-based bandwidth caps (if they exist)?

    like the title says, is it possible to lift a router based bandwidth cap (if one exists) on my router. im only pulling about 100kb/s on a DSL line. i dont have a wireless setup running, jus straight cat-5 from the router to my cpu. i would assume capping would be done server side, but someone said...

    Stress5 pointsBadges:
  • Problem in Linksys Wireless G ADSL Home Gateway

    Hi, I am using Linkys modem (model : annex -A) i am configure the modem using rechargable card,encapsulation is RFC 2516 pppoE,multiplexing is LLC,qos type is UBR,autodetect is Enabled,Dsl modulation is ADSL2+, vpi/vci is 0.35, after save changes i see the stsatus interface is up, but i try to...

    Elite20 pointsBadges:
  • How to connect a server using DSL routers

    My company is having 30 users at different different location all of them is having separete DSL routers with a VPN tunnel ... And i wanted to connect them to the main server and create a active directory to deny using the cdrom,startmenu, flash drive, games and etc they should only use the company...

    Sufisnetwork5 pointsBadges:
  • Switching ISPs and need help reconfiguring VPN and Firewall settings

    When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

    NetworkingATE1,545 pointsBadges:
  • Configuring Cisco 1700 with Cyberoam box

    This is regarding the Cisco 1700 series router, which has been configured by some other experts. We are now having a lease line and the Cisco router connected with Cyberoam box. Earlier we had an ADSL connection, so I had direct IP where there was no need to logging into Cyberoam everytime. But...

    NetworkingATE1,545 pointsBadges:
  • How to add a subinterface in Cisco 2811 router

    how to add a subinterface in router 2811

    Fsheb5 pointsBadges:
  • Cisco 2811 router with Ethernet access to MPLS

    Can a Cisco 2811 router support a 40Mbps MPLS connection using Fast Ethernet access?

    Webonauta15 pointsBadges:
  • Router configuration – Invalid input message configuring EIGRP

    I enter the following command to configure eigrp using a wildcard mask, and I get the output "invalid input detected at" under the first character of the wildcard mask. This same command works on all other routers in the network. The command seems correct? Why this router? R2(config)#router eigrp...

    Ytechie5 pointsBadges:
  • VPN Tunnel

    Hello. This is my current setup. Main office has several servers (usual web, ftp, exchange, dns) which is using an RV042 router for the network. At the remote office, I have a Netgear FVS318v3 router that is maintaining the VPN tunnel back to the main office. I can't narrow down the problem. I...

    rcraig11420 pointsBadges:
  • Need your help to connect remote sites

    I have 4 cisco 800 routers i have configured with NAT and DHCP and they are all connected to the internet via satellite. I have a database server that i want remote sites to access it has an ip 192.168.0.2. All the four LAN'S are on the network 192.168.0.0 255.255.255.0 and they are behind a public...

    Kenweed5 pointsBadges:
  • Configure 2 lease line on Same router 2811

    Hi All, Currently we are having 1 lease line in our office and soon we are going to have another lease line as backup from other service provider,now the thing is if the provider of the lease line is same then it will be very easy for mr to configure it becoz of same publice ip..but now it becomes...

    Deveshbais10 pointsBadges:
  • What command to see how many times the particular link is down/up in Cisco 3845 router?

    What command can I use to see how many times the particular link is down and up in Cisco 3845 series router in cap side? For example: s1/0:12 and how to know in branch side in 1800 series router exp-s0/1/0

    NetworkingATE1,545 pointsBadges:
  • How to find Cisco router memory

    How to find CISCO router memory? and if possible to use 2 ip address for one router

    Nazar5 pointsBadges:
  • in a cisco router what does he following configuration statement mean

    in a cisco router what does he following configuration statement mean s 0.0.0.0.0.0.0.0 serial0

    Fsrock35 pointsBadges:
  • How to block a series of IP addresses in Cisco 2600?

    i want to block a series of Ip address in 2600 series, pls suggest me how is it possible , what is the command line

    Riyaz10 pointsBadges:
  • Configure PIX to allow access to Remote Web Workplace and Exchange Server on SBS 2003

    We have the following network configuration: Router -------- Outside: Static IP from ISP Inside: IP Address: 10.0.0.1 (Static) DHCP enabled for all other clients Pix ------- Ouside: 10.0.0.2 (DHCP from Router: Resvered) Inside: 192.168.2.254 (Static) Network ---------- 192.168.2.0 255.255.255.0 All...

    KitManSupport5 pointsBadges:
  • CISCO 2811 Scalability

    I have a CISCO2811 Router with two Fast Eth ports. Whether I can add one more module. Whether I can have a bandwidth of 8Mbps WAN in one of my Fast Eth ports. Whether I can balnce two ISPs in this CISCO 2811

    Mss5 pointsBadges:
  • Can make VPN connection, but can’t ping server or access resources

    I set up PPTP VPN through our D-Link DFL-200 hardware firewall here at our company so that people could access network resources from home. The problem is, when at home, they can make a VPN connection just fine, but they can't ping the file server here at work, nor can they access or see any...

    Davemd10 pointsBadges:
  • linksys adsl2 gateway configuring problem

    I cannot seem to configure the product to connect me to the internet. I've tried the RFC 1483 Brigend settings, RFC 2364 PPPoA and the RFC 2516 PPPoE and none of them work. Any help would be appreciated.

    Alan19575 pointsBadges:
  • Cisco Router 2811 with VWIC 2MFT G703 Cards

    MY CEO have provided my the cisco 2811 with vwic 2mft g703 installed in it, is there any person who could give me the step by step instrauction to configre this router, this is my first time to configure router from scrap.

    Techartist20 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following