• How to configure load balancing on Cisco 1751 router with 2 serial WAN connections?

    How to configure load balancing on Cisco 1751 router with 2 serial WAN connections (different service providers)? Thank you.

    NetworkingATE1,545 pointsBadges:
  • Free Chapter – Cisco IOS XR Fundamentals

    Another free chapter download is available on the IT Bookworm Blog. Written by: Mobeen Tahir, Mark Ghattas, Dawit Birhanu, Syed Natif Nawaz Book: Cisco IOS XR Fundamentals Overview: "Cisco IOS XR Fundamentals is a systematic, authoritative guide to configuring routers with Cisco IOS XR, the...

    BrentSheets6,950 pointsBadges:
  • Creating a Trust between two networks on two routers on same floor

    I have two networks -- the first is 192.168.1.1/24 and the other is 192.168.33.1/24. Each network has it own DSL modem/router for Internet connection and are Windows domains (diffrent domain names). The two routers are physically near (50cm) and the two networks are sharing the same floor. I need...

    NetworkingATE1,545 pointsBadges:
  • How to set up a VPN; Router and firewall rules to allow PPTP access

    I am trying to setup a VPN connection at my temple. My temple computer will receive VPN connections so users can work from their homes and connect to Temple's computer to perform accounting and membership maintenance. I have a cable modem, Trendnet Router TEW-452BRP and Vista Ultimate. The Vista...

    NetworkingATE1,545 pointsBadges:
  • Creating a bonded T1 for our data center

    We have two T1 connections coming into two cisco routers. The lines are from different providers. Can we make them into a bonded t1 for our data center? What equipment will we need and what configuration?

    NewnanIT1,110 pointsBadges:
  • Configuration for the OEC or Motorola Canopy router

    I would like to know how to configure the OEC or Motorola Canopy router. Where can I find this information?

    NetworkingATE1,545 pointsBadges:
  • How do I configure Windows Server 2003 as a router?

    How can I configure Windows Server 2003 standard edition as a router that will allow clients to connect to the Internet? I think if I configure the RRAS to function as a router it will direct traffic between LAN and WAN, but I don’t know how.

    Michael Tidmarsh65,700 pointsBadges:
  • Cisco 2811 configuration for managing HTTP and other traffic through two connections

    Hi all, I have one Cisco 2811 router with serial interface for leased line connection to internet and an ADSL WIC for Internet connection too. What I what is to do is let HTTP traffic goes through the ADSL connection and other traffic go through the leased line. Is it possible and how? Thanks

    AKN15 pointsBadges:
  • How to configure SIP server in Cisco 3660 router?

    I'm not able to configure SIP server in Cisco 3660 router (IOS is 12.4T). Can anyone please tell me how? Thank you.

    NetworkingATE1,545 pointsBadges:
  • How can I use DHCP with excluded-address?

    how can i use dhcp with excluded-address?

    1200710 pointsBadges:
  • Cisco 857 Router

    A friend configured a cisco 857 router for me but now i got a different password from my service provider so can you please give me a step by step procedure on how to change the existing password.

    Aspire80 pointsBadges:
  • How to configure Cisco 2811

    How configure cisco 2811 for my small network with two c class ip serieses; keeping the valid security; and configuring ADSL and ISDN module in cisco 2811; from scratch ... step by step

    RizGhauri5 pointsBadges:
  • Bridge mode vs NAT or router mode

    Could any one simply explain the differences between NAT mode Vs brdige mode? And can I configure the same IP range for WAN and LAN interface for a router which can ein brdige mode? Is brdigne mode really requires IPs? Thanks,

    sumeshbnr1,675 pointsBadges:
  • How to delete router configuration

    I have a Cisco 2800 router and I tried to delete all the old configuration but its not deleted. Any idea about this problem?

    Mohadbazzi47170 pointsBadges:
  • IP SLA command does not exist

    I have two routers, one 1721 ( version 12.4) and 2801 (version 12.3T). I want to configure IP SLA, but when I write the command in the CLI router# IP SLA, the command does not exist. What happened? How do I activate the command? thanks

    Techcol5 pointsBadges:
  • How to configure two Cisco 2600 routers

    Hi, we have two Cisco 2600 routers, one deployed in our main office and the other in our remote site. We also have two DSL connections. We have our Exchange server in main office. Q1. How to configure the two router to use the 2 DSL connections that we have? Q2. How to route our exchange server to...

    Killerj5 pointsBadges:
  • Configure and deploy network with Cisco 2600 router

    I've tried configuring a router for a network with 98 hosts. I'm using Network Visualiser 4.0 by Routersim. But I'm not getting it done at all. Is there any other means, methods, techniques in configuring routers for such office building network. Or any suggestions on how to configure and deploy...

    LESHTEK5 pointsBadges:
  • Cisco 2811 – Divide Bandwidth for networks

    We have Cisco 2811 router with on serial interface and four fast ethernets. We planned to take 10 mbps Internet leased line and we have to divide it into two parts. For one network is should be 6 Mbps and the rest bandwidth for another network. Can any help in this?

    NWEA55 pointsBadges:
  • Configuring Cisco Wireless Router

    Greetings, I have a Cisco 871 wireless router and am having problems configuring it to act as a Wireless Access Point for my small internal network using Microsoft Small Business Server 2003. I am trying to set up one client access via wireless. Using Cisco’s SDM Express, when trying to change...

    RP@ADF15 pointsBadges:
  • Hughesnet

    I have 4 pcs running Windows 7 Professional connected to the Internet through a Hughes Net hookup. The pcs need to be networked together and need to have static IPs. There is only one cable connection to the Hughesnet modem/router or whichever it is. Can a Cisco Router be used to connect the other...

    ntucker020 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following