• Unable to run Upgrade Assistant on AS/400 V3R2

    i'm 1st time taking up the task in CISC to RISC migration, with the following scenarios :- 1. i've tested Upgrade Assistant in a V3R2 model 300 machine at my workplace, and it's running fine, with spool file of the Upgrade Assistant generated. 2. However, my team mate at remote site was unable to...

    LifeHouse5 pointsBadges:
  • How to check the required/latest PTFs to be installed on iSeries?

    How to check the required/latest ptf's to be installed on i series(v5)?

    Syedm180 pointsBadges:
  • PTF – AS400

    Hi, we have a V5R3 720 box and we were applying CUM and HIPER ptf's, as you are aware there are 7 CUM and the rest for DB2 and HIPER, the system did not ask for the 7TH CD and the ops by mistake instead of loading the 1st set of the HIPER cd, loaded the 7th CD of the CUM again, now system is back...

    harisudhan211,005 pointsBadges:
  • how to check for the latest ptf installed in v5r4?

    command to check latest ptf installed

    Subhro50 pointsBadges:
  • applying program Temp Fisxed

    I want to Permanetly apply some temporary PTF's. I want to use APYPTF and set it to happen at the next IPL. My question is do I have to be in dedicated mode when I use the APYPTF command ? Thanks

    Johnd0155 pointsBadges:
  • Cannot get PTF group SF99540 to status Installed

    Hi Gyus. Been searching all over for the answer to this including Assist but with no joy. PTF group SF99540 remains at 'Not installed' because there is a special handling PTF MF41210 for product 5722999 V5R4M0 Type 'Pre-apply permanently'. Now this is for a product which is not installed on our...

    Mike.Butler40 pointsBadges:
  • HTTP SERVER i5 V5R4

    We've i5 270 Machine with V5R4M0. After applying the HTTP Latese (cumulative) PTF's, I'm able to have the Main "i5/OS Tasks" page. But when I click on "IBM Web Administration for i5/OS", "Internal Server Error " page appear. Will anyone please guide me what else PTF should I applied?

    huzaifa35 pointsBadges:
  • Error after V5R2 CUM load failure

    I loaded a CUM PTF onto a clean install of V5R2 (reason - replaced all disks) I can't get the PTFs to install as I goofed and installed the Group befor the CUM. I need to restore my OS and start again without reinstalling the Licensed Internal Code. I have a tape backup - how do I get to the screen...

    MBERIC120 pointsBadges:
  • SAVSECDTA & SAVCFG

    If only user profiles and devices configuration were changed after an Entire System Backup, can I just do a SAVSECDTA & SAVCFG as a fall back backup before I load in PTFs ?

    Saihong5 pointsBadges:
  • PTF exit program

    I am about to write a PTF exit program in CL. I have gone through the infocenter docuementation but some questions: 1. If I have 10 PTFs and that is already been loaded using LODPTF, how many times PTF exit programs will be called if I issue APYPTF? If it is 10 times then in which sequence? I mean...

    Raju40060 pointsBadges:
  • BRMS, AS400, WRKMEDBRM

    Using WRKMEDBRM in BRMS, when a tape has been used, BRMS doesn't change the Expired Column, it remains with a *YES. I use a v5.4 upgrade. What can I do to retain accurate representation in BRMS. Could their be a PTF that could fix this?

    Alexhomar10 pointsBadges:
  • iSeries V5R1 Hyper PTF Install

    Hello, I read that is better to install cumes ptf first and then hyper ptf. My question is: Is it possible to install only the hyper ptf? Another issue that i have is that i cant find the ptf cover letters for SF99097 hyper ptf. Thanks in advance and Best Regards, Koco Papagjoni

    Infoko65 pointsBadges:
  • SMP/E Receive FROMNTS Question

    I have downloaded a CBPDO for Websphere 6.1.*. We (our shop) would like to now receive the function only then "pick and choose" the PTF's which to receive. How do I write the receive statement after the FROMNTS(XXX*****) to receive only the function itself. I am at a loss. No matter what I have...

    Sysprog405 pointsBadges:
  • SMP/E messup

    SMP/E. I had a ptf go PE'd after I install in production. It was causing errors, and I needed to back off. In a rush, I accidently ran a reject on two ptfs prior to running a restore. Now I have two ptfs applied but not received. A restore check shows I would need to accept many, many ptfs. Also,...

    Mvssyprog5 pointsBadges:
  • V5R3 Upgrade – RJE – BSC

    After Upgrading from V5R2 to V5R3 an old style BSC RPG program no longer functions. Does anyone know if a Licensed Program is missing or a PTF is required. Have not been able to find much info. Thanx in advance

    INSATIABLE0 pointsBadges:
  • Damaged File In Save Operations

    I have a file that is damaged, therefore, it will not save during my nightly backups. The file is QASZRAIRD in library QUSRSYS. Does anyone know what this file is used for or how I can find out what this file is used for? Can I delete the file and re-create the file, or will that cause more of a...

    Bkr0963c0 pointsBadges:
  • Installing PTFs questions and concerns.

    I am now responsible for installing PTFs on the as400. I will be performing my first install on June 25th. I have some questions if someone doesn't mind helping? 1. Documentation says to check the CD to make sure that it works. I put the CD in my CD drive at my local PC and browsed through the...

    Bkr0963c0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following