Configuring a devd for printing IPDS from AS/400 to Ricoh mpc2503

It prints nonsense characters, but the 400 says it has printed.

jjakubisin5 pointsBadges:

IPDS printer prints 2 copies of barcode page

We have a homegrown program that prints a barcoded (6 0f 9) page. I have ran tests and the spool file has only one page of data and is set to 1 copy. When we send the report to an IPDS printer (HP-4050) it prints two copies. Why should it do this? All other reports sent to this printer are normal....

azohawk4,015 pointsBadges:

Converting IPDS to AFPDS and getting overlapping characters

We need to replace an IPDS printer but would like to skip the IPDS requirement (co$t). I have read up on converting IPDS to AFPDS printing and testing my conversion. We have about half a dozen documents that print barcodes (otherwise we could use SCS protocol). I have a couple of documents that are...

azohawk4,015 pointsBadges:

Form Definition in iSeries

Hi, I would like to know if there is any Form Definition in iSeries that have a Margin of 1/8 inch. I believe that F1C10110 had a margin of 1/6 inch. We had a problem that the bottom of the printing is being cut off. Any advice? We are using Printronix T5304r. Help!

TeddySoh50 pointsBadges:

Using two Output Queues to send prints to one IPDS 4247 Z03 Printer?

Are we able to set up two queues pointing to the same IP address in the DEVD? We are worried that the Printer has no Queuing capability and will cause issues? Is this correct or is this just an old fashioned hangover from old Line Feed Printers. Are these newer IPDS printers capable of handling...

Sxlad200145 pointsBadges:

Adding a new printer

Hi, We just received a new *IPDS printer, I added it thru: WRKDEVD WRKWTR : started Received msg: “RICOH1 not available Device not powered on use WRKCFGSTS to id the status of the device” in WRKCFGSTS, nothing that would relate to RICOH1 or the ability to add any entry. Any ideas?

smintz95 pointsBadges:

Tracking IPDS printing on AS400

How do I pass on user information to the printer from the AS/400? That is, if I wanted to embed user and job information on the IPDS job and send it to the printer, how would I go about it? 

As400newton5 pointsBadges:

IPDS Stream File and Duplexing

I am including the duplex option and adjusting the Medium Copy Count and the Medium Modification Control to reflect duplexing in the stream file. I must be missing something, when the spoolfile prints, the printer sounds like it is duplexing, but does not print on the back of the form. The next...

anncyb80 pointsBadges:

*IPDS printing on network printer

We have obtained a Tally T6212 network printer with *IPDS option to replace an IBM 6400 twinax printer. I have tried many different settings: CLASS(*LAN) TYPE(*IPDS) - Remote outq and virtual printer, but to no avail. The standard SCS output is printed, but an *IPDS printfile is either printed with...

r.otto810 pointsBadges:

barcode

I have IPDS printer. But I don't know how I can or which source code could be use in RPG ILE to issue a some master data as barcode label and take label from printer

SEYYAH5 pointsBadges:

HP4350 *IPDS printer to print PCL

I have an HP4350 *IPDS printer that I want to be able to print *IPDS and PCL on the iSeries. How do I set this up? Do I have 2 outq's or do I set up 2 separate printers with the same IP address with 2 different device types? I have several to set up but once I can get assistance with one I will be...

Tpinky4,165 pointsBadges: