• Cisco show command script

    Hello. I want to implement a simple and easy to use script that would allow me to do a sequence of Cisco IOS commands. Can anyone help me? For example, if I want to sent a customer a script with the following commands but in a script so that they cannot change it. Thank you, Show ver Show config...

    Jay249690 pointsBadges:
  • CISCO vty auto command

    A user cannot use show running-config and config terminal using his default permission to my company router after he connects our edge router via telnet using port 23. I have to fix this problem without changing his privilege level. And I have to also solve this issue by using only a single...

    Bibs40 pointsBadges:
  • What happened if I set ip unnumbered fa0/0 in my serial interface and later my fa0/0 went down?

    My question is simple. what happened if I set ip unnumbered fa0/0 in my serial interface and later my fa0/0 goes down. if I establish ospf in that network which interface will proces the hello packet and which interface via send the hello packet ?. load balance ?

    Bibs40 pointsBadges:
  • what IOS requirement to configure BGP on cisco router

    Does Cisco 1841, 3845,1721 ,1750 Router support BGP or not? If yes, then which minimum IOS with version is required to support this?

    Sathya130319745 pointsBadges:
  • Installing an IOS on a Cisco router or switch

    I would like to know the process of installing an IOS on a cisco router or switch. What are the steps and commands for installing the IOS.

    Kartikc920 pointsBadges:
  • Licensing problems when virtualizing servers?

    I've talked to several people who've run into licensing restrictions when virtualizing their environments, and was wondering if this is a common headache? I know Cisco's changed some recent policies which have affected testing platforms, but was wondering if anyone else has run into problems,...

    Michael Morisy8,663 pointsBadges:
  • Cisco’s IOS emulator crackdown: What are your thoughts?

    The latest buzz around Cisco is that its latest iteration of its emulator OS, IOS 15, will help the company crack down on the use of its IOS emulator without plugging in a product key -- something many home network pros and enterprise network managers have relied on until now, especially when...

    JennyMack4,280 pointsBadges:
  • networking:question on summarization

    what are the steps to get the summary address and the summary mask of a group of network addresses in a cisco router?.

    080676580085 pointsBadges:
  • HSRP in cisco

    I have L3 core switches, I want to configure HSRP for vlan 30, Please verify my configuration. My active router should be core 3 switch. Core swith 1 interface Vlan30  description ***Wireless Network Vlan***  ip address 192.168.21.252 255.255.254.0  no ip redirects  no ip unreachables  no ip...

    Ekansh405 pointsBadges:
  • Networking

    show ip arp | in [em]ip address[/em] This command is used to find mac address and Switch port of ip address, but how can we find IP Address from Mac Address in Cisco Switches ?

    Ekansh405 pointsBadges:
  • Problems witih Cisco AP Aironet 1231AG

    hello! i have done something very stupid...I erased cisco IOS image and now when i connect via com port and set up the ip address, netmask and default router, i still cannot connect to the AP i can't even ping the AP, and in order to upload other image i must be connected to it via tftp but every...

    Air1231AG5 pointsBadges:
  • Cisco Catalyst WS-C6506 – link termination question

    I need Help for one of our solution on our site. Senario We have a simple campus network on our site where we have Core, dist.and access Switches. Two Core Switches that are C6506 having redundancy. CAT6507 Chasis WS-C6506 SUP WS-X6K-SUP1A-2GE MSFC-2 WS-F6K-MSFC2 1000BaseX Ethernet WS-X6416-GBIC We...

    Chitah10 pointsBadges:
  • Cisco 1841 security bundle

    Hi, I am an heir of a cisco 1841 router with an IOS that doesn't have the security bundle like firewall, QoS, VPN and those other staff that are suppose to be included asside from the basic features. The router is performaing well but I want to uprage its IOS. However, its out of support. Could...

    JuneC155 pointsBadges:
  • Cisco Catalyst Express 520 Switch Console?

    I have just taken delivery of a the above mentioned switch. It doesnt have a console port, does anyone have any idea how to access the IOS?

    BlackBullet30 pointsBadges:
  • How to add a subinterface in Cisco 2811 router

    how to add a subinterface in router 2811

    Fsheb5 pointsBadges:
  • How do you configure IOS to output the logs on the VTV line?

    Logged on to Cisco IOS via VTV and entering debug command but got no output from the logs. How do you configure the device to output the logs on the VTV line?

    NetworkingATE1,545 pointsBadges:
  • IOS setting

    what is ios setting for D LINK CABLE?

    Sh20 pointsBadges:
  • Security Issue Cisco ASA 5200

    Hi..... am Working as a Technical support under Network Team.Here We are using Cisco ASA 5200 for security purpose. Our Task - Blocking Sites and some particular Protocols. We can able to block Sites through IP range.But it is not working while we apply Blocking Ports. Currently we are using cisco...

    Technical Support5 pointsBadges:
  • CISCO commands

    What CISCO command would you use to see devices connected to a switch\router?

    Rmatt5 pointsBadges:
  • Show Interface Command Output

    Can anybody interprete "show interface" command output on cisco routers?

    Gajjar35 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following