• How do I use my 2 CISCO ASA 5520 with my CISCO 2800 Router over my LAN

    I'm working to get my CISCO ASA 5520 to connect to my CISCO 2800 Series Router and then to 8 CISCO 871 Routers for my DATA CENTER setup. Can I achieved this and how would you do same?

    Soldierlorry15 pointsBadges:
  • Cisco ASA 5510 site-to-site with PIX v6.3

    I've recently developed a need to connect 2 networks together. One network (PIX Network) is currently connected to another network (DOMAIN 1) already via IPSEC site-to-site VPN. The other (ASA) is connected to many other sites via IPSEC site-to-site VPN and is those sites main domain server (DNS,...

    Madpawn220 pointsBadges:
  • How to configure session time on ASA 5500 series

    I have been running an ASA 5520 in transparent mode on our network. After removing the appliance several users state that they are experiencing increased performance. What could cause this performance increase.

    TCPDUMP5 pointsBadges:
  • How to clear asp routing table on Cisco ASA

    How to clear asp routing table on ASA.

    Superpinky5 pointsBadges:
  • Restore configuration for ASA 5520

    I have a Cisco ASA5520, i create a backup configuration using the ASDM, but I can't restore the configuration because the option to restore does not appear, how can I restore the configuration I save??

    Carlos83185 pointsBadges:
  • site-to-site problems.

    I've recently had a need to connect 2 networks, but both networks have the exact same IP scheme. We need one computer one on one side to connect to the server at the remote site, but that server has the same IP as the data base server from the computer's side. How will I be able to connect a...

    Madpawn220 pointsBadges:
  • connecting 2 networks

    I'm looking to connect 2 networks that have the same IP's and subnet (192.168.0.XXX/24). I'm not looking to completely merge these 2, but I'm looking to setup a VPN for about 2-3 computers to run on SITE A's network and have access to SITE B's Server. SITE A IP scheme is 192.168.0.XXX/24 and SITE...

    Madpawn220 pointsBadges:
  • Cisco ASA 5505 Limit IP that can send mail to the Internal network

    We have a spam blocker that sits on the Internet and forwards clean mail to our Exchange server. The MX record points to this IP, but we are still getting a lot of spam that never passes through our spam blocker. I have confirmed that it is not an internal spambot. Question: How do I configure the...

    Edctech45 pointsBadges:
  • CiscoASA5505 DNS not getting to domain reverse lookup zones.

    We are a state agency with a main office here, then about 45 smaller offices throughout the state. The small 1 person offices connect back here via a web provider (ISP) and VPN client. The rest connect back here using either a Cisco PIX 501 (4 of our older small offices) or a Cisco ASA5505 - and in...

    Shadowspapa5 pointsBadges:
  • How to set up a Cisco ASA 5505 VPN using the client behind a Cisco 1841 router using the serial interface

    how to set up a cisco asa 5505 vpn using the client behind a cisco 1841 router using the serial interface

    Sparky42wv5 pointsBadges:
  • Interface for ASA 5510

    Hi , Brother/Sisters . I am using ASA 5510 with 2 interface enable ( Inside and Outside). However , I did notice ASA still have remaining port is not using. I would like to set up Wireless Access Point and direct plug into the ASA. may I know any recommendation or reading material on this? Because...

    Likom15 pointsBadges:
  • Cisco ASA WebVPN – Clientless SSL user sessions keeps dropping

    I am having an issue where a Cisco ASA configured with WebVPN (Clientless SSL) user access. Connection via NT domain authentication is successful, and it is possible to browse a CIFS share, however randomly (4 secs to about a minute) the session is terminated with an idle timeout message. I have...

    OrangeNewbie55 pointsBadges:
  • Cisco ASA 5505 setting up a DMZ

    I need it to talk to the internal network and for Outside to be able to access the website. We have an external IP's and would like to have two of them become static to two different internal Websites. Externals are 44.44.44.x . Internal is 192.168.x.x. VPN is in there too. I'd like for outside to...

    bradob160 pointsBadges:
  • Cisco ASA 7.0 version, Identity Certificate issue.

    I did creat my first trust-point on my corporat Cisco ASA 5520 firewall then i successfully get my CA certificate from my microsoft Root CA in the enterprise via MSCEP, then i did try to enroll the Identity Certificate with the same trust-point, the request showed up in the pending request...

    Dywanah25 pointsBadges:
  • Server and ASA DMZ

    Hi Im from Guinea Bissau west Africa then i have some problem with my network. My server doesnt see my ASA DMZ and ASA DMZ doesnt see the server too. So what i have to do solve this problem. Pls if any one can help mail me by omartins@mtn-bissau.com or otnielomar@hotmail.com.

    MTN5 pointsBadges:
  • IPSec Tunnel

    Can you build an IPSec tunnel from an Internal Router to an External ASA, passing through a PIX? The PIX, which I have no control over, I am told is running 6.2 and cannot do IPSec (???) and I am having to attempt this feat! Has anyone experienced this in the real world? All I can find is examples...

    Solarxterra0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following