I have a question for you, concerning about the HUS storage and Brocade SAN switch which is 6505. I have the 4 LUN. and I present this 4 LUN to the one server through the 2 FC cable (0A and 1 A) of Storage port. Normally it can done. Between Server and Storage, we have 2 SAN Switches. These 2 SAN switches is not communicate each others. In the Switches, How to configure for the Zoning? Let's say, from the storage site, there have 2 address for the wwn which is pWWn and nWWn. From the server site, there have 1 address only for the wwn which is HBA card address.
Software/Hardware used: Brocade san switch and HUS 110