Firstly you’ll need to configure the routing profile settings and point to a “location” where the data resides. You can either map to that location of provision an IP address for that location. To change it, you will have to go into your IP pool outside of RVI to either “mask” it or change the mapping location. You may have to talk to your network admin about this as you can’t just change it on the fly. Are you storing your data on old IBM jukeboxes? If that’s the case then it will become more difficult as IBM no longer supports those jukeboxes. Your best bet will be to replace the juke with an actual optical library that has it’s own dedicated IP pool (making it easier to assign and reassign IP addresses on the fly as required.