I am not a Network Specialist, but I do know a small amount about configuring a CISCO switch. However, I have been asked to configure a Foundry Switch. I am having problems with a few commands and maybe someone out there can help me out. Here is what I'm getting when I try and configure this Foundry Switch.
no service pad [equivalent cmd not found]
service timestamps debug uptime [equivalent cmd not found]
service timestamps log uptime [equivalent cmd not found]
ip subnet-zero [equivalent cmd not found]
ip address 10.10.1.80 255.255.255.0
no ip directed-broadcast [no cmd available here]
no ip route-cache [no cmd available here]
config# vlan 1
config-vlan-1#ip-subnet 10.10.1.80 255.255.255.0
error: invalid subnet mask 255.255.255.0
line con 0 [equivalent cmd not found]
exec-timeout 0 0
transport input none
line vty 0 4 [equivalent cmd not found]
line vty 5 15 [equivalent cmd not found]
Can someone point me in the right direction?
Free Guide: Managing storage for virtual environments
Complete a brief survey to get a complimentary 70-page whitepaper featuring the best methods and solutions for your virtual environment, as well as hypervisor-specific management advice from TechTarget experts. Don’t miss out on this exclusive content!