Cisco Aironet 1040 cannot get IP address from DHCP server

Tags:
Cisco Aironet
DHCP
I have a Cisco Aironet 1040. The client cannot get an IP address. I have a DHCP server. If I input static IP address on the PC, it works. Please help. Below is the config of the AP:
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime
service password-encryption
!
hostname ap28J
!
logging rate-limit console 9
enable secret 5 $1$UL.f$soPKYziZgucBY4EZHtRFT0
!
no aaa new-model
clock timezone +8 0
no ip domain lookup
!
!
dot11 syslog
dot11 vlan-name main vlan 26
!
dot11 ssid MSGPhil
   authentication open 
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 051F0B1C324A49004851
!
!
!
username Cisco secret 5 $1$PURe$.fJRaGC/S5d6vVgm2Qgbv.
username MTSPI privilege 15 secret 5 $1$BG2o$TbFWXnie/0w7outf2sxz/1
!
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers tkip 
 !
 ssid MSGPhil
 !
 antenna gain 0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 !
 encryption mode ciphers tkip 
 !
 ssid MSGPhil
 !
 antenna gain 0
 no dfs band block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 no keepalive
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 192.168.26.9 255.255.254.0
 no ip route-cache
!
ip default-gateway 192.168.26.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
snmp-server community OPMG RO
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
!
end
0

Answer Wiki

Thanks. We'll let you know when a new response is added.
Send me notifications when members answer or reply to this question.

Discuss This Question:  

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when members answer or reply to this question.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following

Share this item with your network: