Hello, I have a range of 6 public IP addresses and an ASA5505
I have two subnets and 2 VLANs
Inside network 10.0.0.0/24 VLAN 1
DMZ subnet 172.25.15.10/24 VLAN 40
All devices in the inside network connect through public IP 126.96.36.199 (not real IP)
all devices in the DMZ subnet connect using the same Public IP address
I know I can one to one NAT to give the Servers in the DMZ public IP addresses but what i am looking for is exactly what the inside network has, all devices in VLAN 1 to share the public IP address and all devices in DMZ subnet to share the second IP address
Just to be clear, all devices in the subnet should use my second Public IP just as the inside network does.
ASA version 9.3
Free Guide: Managing storage for virtual environments
Complete a brief survey to get a complimentary 70-page whitepaper featuring the best methods and solutions for your virtual environment, as well as hypervisor-specific management advice from TechTarget experts. Don’t miss out on this exclusive content!
No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.
Your password has been sent to:email@example.com
To follow this tag...
Thanks! We'll email you when relevant content is added and updated.
Share this item with your network: