The musings of an IT Consultant

Feb 29 2012   5:03PM GMT

Cisco ASA DHCP issues on WAN port

Raj Perumal Raj Perumal Profile: Raj Perumal

Hi folks, so some people have reported having issues with the Cisco ASA firewall and acquiring an IP on the wan port from the ISP when set to DHCP mode instead of static.

This is an issue that usually has nothing to do with the ASA, bu t with the ISP modem itself. Make sure you reboot the modem, and you should get an IP with no issues. This is of course assuming you have your dhcp settings set right on the WAN interface.

You can set the setting using the command “ip address dhcp setroute”.


 Comment on this Post

There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when other members comment.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

Share this item with your network: