Connecting 2 Switches via Fiber (Cisco SF 300 – 48p) and creating VLANS using web interface

Profile: kotechabharat
Tags:
Cisco
VLAN
I am working on to deploy 2 Cisco Managed Switches (Cisco SF300- 48p) and connect it over Multi-mode Fiber optic cable (50 Microns OM3). 1st Switch will be on floor 5 and 2nd switch will be on floor 30, distance is around 250 Meters. What would be start-up steps to configure both switch and creating VLAN? (Also need to provide Internet access for all VLAN and DCHP address to clients) For Fiber Connectivity (What is the connectors to use at both ends)? What is the Fiber patch cord should I use LC to? Thanks!

Reply to this discussion

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when other members reply.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following

Share this item with your network: