Back To Basics: Getting Back To The Basics of SQL Server
SQL Server 2008 Resource Governor
What Do All These Undocumented Stored Procedures Do
Storage for the DBA
Virtual SQL Servers Should I or Shouldn’t I
SQL Server Clustering 101
Thanks for attending the Code Camp, and see you next time.
When you use the SEND commad you also have to use the BEGIN DIALOG command to get everything ready. So before you can send the message you have to start a dialog, which then starts a conversation, with the service which will be doing the heavy lifting. This is done with the BEGIN DIALOG command as shown in the code sample below.
After you have the dialog handle in the @dialog_handle variable you use this handle to send the actual message to the conversation which was started when you begin the dialog. In our example below we are just going to send the contents of the sys.tables DMV to the the queue.
DECLARE @xml AS XML
DECLARE @dialog_handle AS uniqueidentifier
SET @xml = (SELECT * FROM sys.tables FOR XML AUTO)
BEGIN DIALOG @dialog_handle
FROM SERVICE [tcp://codecamp/AW/sample_send_service]
TO SERVICE 'tcp://codecamp/AW/sample_receive_service'
ON CONTRACT [tcp://codecamp/AW/sample_contract];
SEND ON CONVERSATION @dialog_handle
MESSAGE TYPE [tcp://codecamp/AW/sample_messagetype]
Confused yet? Shortly there will be a Back To Basics post about the RECEIVE command which is how you “read” the message. At the end of that post I’ll include a link to some sample code which I’ve used a few times in my sessions which should help wrap this all up.
A friend at work has entered a comic book cover contest. Needless to say he’s very talented. His picture is below. The reason that I’m posting this is it’s a public voting contest, and he needs your help. The winner of the contest will have their cover published as one of the covers of the comic when it’s released. His name is Jamie Tyndall, you’ll find his artwork second from the bottom of the list.
Before we can begin to figure this out we need to know what the average work load for the disk is going to be. In the SQL Server world this is easy. SQL Server does everything in 8k pages within 64k extents. Each time it needs to read from the disk it reads the 64k extent from the disk and each time it writes to the disk it writes the 64k extent. So our data size is 64k.
We take this number and divide by 64. So in our case 64/64 = 1. 1 as a percentage is 100%, so 100% of our data reads and writes are requiring two physical reads or writes.
If you are in the exchange world everything is done in 8k reads and writes. So in this case 8/64 = 0.125 or 12.5% of the reads and writes are requiring two physical reads or writes.
Now for SQL Server just because we are doubling the number of operations doesn’t mean that by fixing this you will double your disk speed. What it means is that if your disks are running at 100% utilization you can probably reduce your disk load by 50%. But if your disk utilization is 30% your disk activity won’t be any faster as your disks are not running at capacity. Will you see a performance improvement, yes. Will it be as high as if your disk was at 100%, no. Should you still fix the alignment problem? Yes.
To fix the problem isn’t easy. You have to remove all the data from the disk, and delete the partition, then recreate the partition using the DISKPAR.EXE (Windows 2000) or DISKPART.EXE (Windows 2003/2008) with the ALIGN=64 setting. To remove the data from the disk you will either need to migrate to a new disk within the server, or backup the database, fix the alignment then restore the database.
If you needed to you could setup three or more servers in a chain and have them forward the messages from one server to another. This would be handy if you needed to get messages through firewalls and the source and destination servers were not permitted to talk to each other. The only requirement to do this is that one server in each conversation must be a paid for edition of SQL Server. In other words two SQL Express instances can not send messages to each other directly. Those messages much be forwarded through a Workgroup, Standard, or Enterprise instance.
Before you can create a Service Broker Route, you have to have an endpoint on the remote machine. For this purpose we’ll assume that the Service Broker endpoint was created on port 1234. Our local server is SQL1 and the remote machine will be SQL2. The only other piece of information that you need to know is the Service Broker Instance GUID from SQL2. This is found in the service_broker_guid column of the sys.databases DMV on server2 (fifth column from the right in SQL 2005). If the GUID is all 0s then you need to enable the service broker by using the ALTER DATABASE Command.
The CREATE ROUTE syntax is very easy.
CREATE ROUTE RouteName
WITH SERVICE_NAME = 'ServiceName',
BROKER_INSTANCE = 'ae8505fa-b84d-4503-b91f-3252825ccf09', /*Use your GUID here*/
If your target is using database mirroring set the MIRROR_ADDRESS to the name and port number of the mirror. This way in the event of a fail over the sending server can continue to deliver messages.
If you need the route to expire on a specific date, for example you are sending data to a partner and you want to automatically stop sending them the messages when the contract ends, add the LIFETIME parameter with the number of seconds until the route expires. If the LIFETIME is omitted the route will never expire.
(Service names are not actually case sensitive if you arne’t using routing, but if you are going to start routing the messages later it’s better to start off getting them in the correct case.)
The syntax to create the service is pretty straight forward.
CREATE SERVICE ServiceName
ON QUEUE QueueName (ContractName)
If the service will only be the initiator then the contract name can be omited if preferred. If you want to create a multi-user contact you can specify additional contracts by simply making a comma seperated list of contract names.
CREATE SERVICE ServiceName
ON QUEUE QueueName;
CREATE SERVICE ServiceName
ON QUEUE QueueName (ContractName1, ContractName2);
The official fix from Microsoft is to install the older CTP version that you edited the scripts in on another machine and open the un-updated version of the SSIS package on that machine, and copy the code for the scripts into the RC0 version of the SSIS package.
The only object which I’ve had to do this on was a .NET Script Task. I had this problem when going from CTP 5 to CTP 6 as well as from CTP 5 to RC0. This will not effect migrating from SQL 2005 to SQL 2008 as SQL 2005 and SQL 2008 CTP 5 do not use the same scripting engine in the back end.