Top ESX KB Articles
Posted by: MikeLaverick
114 – Running Virtual Machines within Virtual Machines
199 – Segmentation Fault when Copying to Large VMFS Volumes
813 – Setting Network Adapter Speed in ESX Server
861 – Changing the Host Name of a Machine Running ESX Server
869 – Using Citrix MetaFrame XP in a Windows 2000 Virtual Machine
902 – SNMP Traps about Virtual Machine State Not Being Sent
982 – Slow FTP Times when FTP’ing a File from the Console OS/Service Console
930 – Creating a Partition out of Left Over Drive Space after ESX Server is Installed
977 – Getting a DHCP Address in a Red Hat Linux 9.0 or Advanced Server Virtual Machine
994 – Adding Space to an ESX Server Virtual Disk
1014 – Windows Virtual Machine Blue Screens When I Use SAN LUNs1081 – HP Proliant and Compaq MPS Table BIOS Settings for ESX Server
1077 – High CPU Utilization of Inactive Virtual Machines1179 - Networking error, IP address already assigned to another adapter 1290 – IRQ Sharing May Impact Performance
1352 – Unable to Recognize New SAN LUNs After Command Line Rescan
1453 – Run cos-rescan.sh on Lowest Numbered Host Bus Adapter First
1078 – ESX Server 2.x Performance Monitoring Tools
1081 – HP Proliant and Compaq MPS Table BIOS Settings for ESX Server
1107 – Summary of Security Notifications for VMware Products
1134 – Changing the Remote Console Port in ESX Server
1137 – VMID Changes When Resetting or Powering Off Through the Remote Console
1169 – Message About “Tainted” Drivers in a Red Hat Linux Guest Operating System
1174 – Using e1000 Network Interface Cards with the Service Console
1218 – Installing a SUSE LINUX Guest Operating System from DVD
1232 – Disabling Logging or Storing the Log Files
1249 – Using HP StorageWorks MSA 1000 with ESX Server
1302 – Resetting Persistent Bindings in ESX Server
1303 – IBM FAStT to Use Multipathing with HBA & Storage Port Failover with Clustering
1306 – Using LSI Logic SCSI Controller in W2K and WinXP
1318 – VMware Time Sync and Windows Time Service
1320 – Basic Linux Command Reference
1323 – Fix for vmware-cmd Uninitialized Value Errors (ESX2.x)
1330 – ESX Virtual Machine Won’t Start (Insufficient Memory)
1339 – Installing and Configuring NTP on VMware ESX Server 2.0.1 and Later
1349 – Scripted Installer Space Requirements
1352 – Unable to Recognize New SAN LUNs After Command Line Rescan
1362 – ESX Server VMFSv2 Volumes Contain .vmtx and .vmtd Files
1377 – VMotion CPU Compatibility Requirements Stop My Migration with VMotion
1428 – Poor Network Throughput Between Virtual Machines on the Same ESX Server Machine
1435 – Which Guests Have vmxnet Drivers?
1437 – AMD PCNet Windows Driver Security Vulnerabilites
1509 – Virtual Machines with More Than 2GB of Memory Might Fail if Migrated with VMotion
1564 – Gigabit Network Adapter Cannot Establish a Link
1556 – Microsoft NLB Not Working Properly in Unicast Mode
1573 – Recommended Microsoft NLB Mode for VMotion
1436 – Adjusting ESX Server Time Zone
1631 – W2K3 SMP Virtual Machines with Vlance Adapter Lose Network Connectivity
1659 – USB Device Configuration May Cause Error During System Boot
1718 – Can’t locate module char-major-xx” Log Entries Appear After Patching or Upgrading ESX Server
1790 – ESX Server 2.5.1 Fails to Boot on Systems with Adaptec RAID Controller
1890 – Limited Disk Throughput from Windows with BusLogic Adapter Causes Performance Problems
1882 – VM Does Not Power On When It Has an Disk with Raw Device Mapping and IBM Director Is Running
2030 – Using crontab to Schedule vmsnap Backups




