Write Erase archives - Network technologies and trends

Network technologies and trends:

write erase

Jul 27 2009   5:55AM GMT

Reset Cisco 1250 Access Point to factory default settings



Posted by: Yasir Irfan
Cisco Aironet 1250, Access Point, Access Point troubleshooting, factory default settings, Cisco Access Point reset, write erase, Cisco Access Points, Cisco Tips, Cisco Commands, troubleshooting, Network Troubleshooting, web browser interface, Static IP, default settings, Cisco, Cisco Aironet 1250 Access Point, Wireless

 

If you want to reset the Cisco Aironet 1250 Access Point to factory default settings you have to use “Write erase or erase/all nvram” command, these commands resets the Cisco Aironet 1250 Access Point to factory default settings except the static IP Configured. This feature is really helpful if you reset the Cisco Aironet 1250 Access Point accidentally. Still you will have an option to access Cisco Aironet 1250 Access Point  using a web browser interface.

Mindful thinking from Cisco.