Network technologies and trends:

power supplies

1

July 31, 2011  9:54 AM

Key differences between a Nexus 7010 and 7018 Switches – Series 4



Posted by: Yasir Irfan
1.2 Tb/s system bandwidth, 480 mpps system switching, 7018, 80 Gb/s and 60 mpps per slot, BTUs, Cisco IOS, Cisco Systems, cold aisle/hot aisle data center, Data Center, differences between a Nexus 7010 and 7018 Switches, Fabric Card, fault tolerant, hot-swappable power supplies, key features of NX-OS, Linux, Linux based operating system, N7K-AC-6.0KW, N7k-AC-7.5KW, N7K-C7010-FAB-1, N7K-C7010-FAN, N7k-C7018-FAB-1, N7K-C7018-FAN, N7K-DC-6.0KW, Nexus 7000 Series Switches, Nexus 7010, Nexus 7010 cooling, Nexus 7010 fan module, Nexus 7010 Switch Fabric module, Nexus 7018 cooling, Nexus 7018 fan module, Nexus 7018 Switch airflow, Nexus 7018 Switch dissipates, Nexus 7018 Switch fabric module, Nexus Switches, NX-OS, Panduit, Panduit Net-Access 7018 Cabinets, physical difference about Nexus 7010 and 7018 Switches, power supplies, SAN-OS, side to side airflow, special rack, sup1, Supervisor Engines, three load sharing

One more difference I came across among Nexus 7010 and Nexus 7018 Switch is the power supplies, the Nexus 7010 Switch can hold up to three load sharing, fault tolerant , hot-swappable power supplies.  Whereas the Nexus 7018 switch can hold up to four load sharing, fault tolerant, hot-swappable...

December 29, 2010  5:27 AM

How to allocate physical interfaces to VDC in a Cisco Nexus 7000 Series switch?



Posted by: Yasir Irfan
32-port 10 Giga Ethernet Module (N7K-M132XP-12), 48-port 10/100/1000 I/O module (N7K-M148GT-11, allocate interface, Cisco Nexus 7010 Series Switch, Cisco NX-OS software, Cisco Systems, configuring Cisco Nexus 7000 Switch, Core Switches, Data Center, Data Center Switch, default VDC, Fabric Modules, Giga Ethernet, How to allocate physical interfaces to VDC in a Cisco Nexus 7000 Series switch, IP telephony, IPv4 router memory, IPv6 router memory, mission-critical, N7K-D132XP-15 module, Network, Nexus 7000 Configuration, Nexus 7000 Series Switches, port-channels, power supplies, show vdc, show vdc details, show vdc membership, SPAN sessions, Supervisor Modules, Ten Giga Ethernet interface, VDC, VDC1, Virtual Device Contexts

  To allocate physical interfaces to VDC from the config terminal mode type the VDC name and then allocate the physical interfaces as shown below by using the command "allocate interface" N7000-ITKE01#configure t   Bookmark and Share     0 Comments     RSS Feed     Email a friend


December 28, 2010  5:44 AM

How to configure VDC in Cisco Nexus 7000 Series switch?



Posted by: Yasir Irfan
Cisco Nexus 7010 Series Switch, Cisco NX-OS software, Cisco Systems, Core Switches, Data Center, default VDC, Fabric Modules, Giga Ethernet, How to configure VDC in Cisco Nexus 7000 Series switch?, IP telephony, mission-critical, Network, Nexus 7000 Series Switches, power supplies, show vdc, show vdc details, Supervisor Modules, Ten Giga Ethernet interface, VDC, VDC1, Virtual Device Contexts, What is Virtual Device Contexts (VDC) in Nexus 7000 Series Switches

In my


December 27, 2010  6:22 AM

What is Virtual Device Contexts (VDC) in Nexus 7000 Series Switches?



Posted by: Yasir Irfan
Cisco Nexus 7010 Series Switch, Cisco NX-OS software, Cisco Systems, Core Switches, Data Center, default VDC, Fabric Modules, Giga Ethernet, IP telephony, mission-critical, Network, Nexus 7000 Series Switches, power supplies, Supervisor Modules, Ten Giga Ethernet interface, VDC, VDC1, Virtual Device Contexts, What is Virtual Device Contexts (VDC) in Nexus 7000 Series Switches

  The Virtual Device Contexts (VDC) is a new feature introduced in Cisco Nexus 7000 NX-OS, so does it happens to be the first Data Center Switch to provide Virtual Device Contexts (VDC) capabilities. The Virtual Device Contexts (VDC) allows a


1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: