Network technologies and trends:

Nexus configuration tips

1

September 6, 2013  6:14 AM

How to enable redundant Supervisor Engine in Cisco Nexus 7000 Series Switch?



Posted by: Yasir Irfan
Cisco, Cisco Systems, Cisco Tips, Data Center, How to enable redundant Supervisor Engine in Cisco Nexus 7000 Series Switch?, Network Technologies and Trends, Networking Technology, Networking tips, Nexus, Nexus 7000, Nexus 7000 Configuration, Nexus 7000 troubleshooting, Nexus 7010, Nexus 7010 Series Switch, Nexus configuration, Nexus configuration tips, Nexus Switches, Nexus Switching, Nexus tips, NX-OS, NX-OS and Cisco Nexus Switching, NX-OS blog, NX-OS features, Switches

Recently I was upgrading our Cisco Nexus 7010 Switch NX-OS version from 5.0 (3) to 6.1 (4). After the upgrade process when I used the NX-OS command “show system redundancy status” to check the high availability of Nexus Supervisor module-1X Engines I discovered one of them was just power up but...

March 23, 2011  6:13 AM

Telnet by default disabled in NX-OS devices



Posted by: Yasir Irfan
Cisco Command, Cisco IOS Commands, Cisco Switch tips, Cisco Tips, configuring Cisco Nexus 7000 Switch, domain name, how to enable the Telnet Server in NX-OS devices, IP Address, Network technologies & trends, Nexus 5000 and 2000 Series Switches, Nexus 7000, Nexus configuration, Nexus configuration tips, Nexus tips, NX-OS, remote device address, TCP/IP connections, Telnet

  As I am working with Nexus 7000, Nexus 5000 and 2000 Series Switches, I discovered by default  Telnet Server is disabled in a NX-OS devices such as Nexus 7000, Nexus 5000 and 2000 Series Switches. We all know Telnet protocol enables TCP/IP connections to a host. Telnet allows a user at...


1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: