Network technologies and trends:

Networking tips

1

September 6, 2013  6:14 AM

How to enable redundant Supervisor Engine in Cisco Nexus 7000 Series Switch?



Posted by: Yasir Irfan
Cisco, Cisco Systems, Cisco Tips, Data Center, How to enable redundant Supervisor Engine in Cisco Nexus 7000 Series Switch?, Network Technologies and Trends, Networking Technology, Networking tips, Nexus, Nexus 7000, Nexus 7000 Configuration, Nexus 7000 troubleshooting, Nexus 7010, Nexus 7010 Series Switch, Nexus configuration, Nexus configuration tips, Nexus Switches, Nexus Switching, Nexus tips, NX-OS, NX-OS and Cisco Nexus Switching, NX-OS blog, NX-OS features, Switches

Recently I was upgrading our Cisco Nexus 7010 Switch NX-OS version from 5.0 (3) to 6.1 (4). After the upgrade process when I used the NX-OS command “show system redundancy status” to check the high availability of Nexus Supervisor module-1X Engines I discovered one of them was just power up but...

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: