DHCP

Nov 26 2008   5:59AM GMT

What is Dynamic ARP Inspection (DAI) ?

Posted by: Yasir Irfan
Network Security, DHCP, Switches, Cisco, ARP, Switching, Cisco Tips, Cisco Learning, DHCP Snooping, Dynamic ARP Inspection, DAI, Security Features, IP to MAC

Dynamic ARP inspection is a security feature which validates ARP packet in a network. Dynamic ARP inspections validates the packet by performing IP to MAC address binding inspection stored in a trusted database (the DHCP snooping database) before forwarding the packet. Dynamic ARP intercepts, logs, and discards ARP packets with invalid IP-to-MAC address bindings. This capability protects the network from certain man-in-the-middle attacks.

Dynamic ARP inspection ensures that only valid ARP requests and responses are relayed.

The switch performs these activities:·        

Intercepts all ARP requests and responses on untrusted ports ·        

Verifies that each of these intercepted packets has a valid IP-to-MAC address binding before it updates the local ARP cache or before it forwards the packet to the appropriate destination·        

Drops invalid ARP packets

Nov 22 2008   12:56PM GMT

How to configure DHCP Snooping in a Cisco Catalyst Switches.

Posted by: Yasir Irfan
Networking, DHCP, Switches, Cisco, Switching, Routing and Switching, CCNP, Cisco IOS, Cisco 2960, Cisco 2950, HSRP, Cisco 6500, Cisco Tips, Cisco 3560, Cisco Learning, Server Security, Cisco 3750-E, Cisco 3560-E, IOS commands, Cisco Systems, Cisco 6500 Series Catalyst Switch, Cisco 6503, Cisco Catalyst 6503-E Switch, Cisco Catalyst 6506-E Switch, Cisco Catalyst 6509-V-E Switch, Cisco Catalyst 6509-E Switch, Cisco Catalyst 6513 Switch, DHCP Snooping, Configuring DHCP Snooping, 802.1 Q, Trunk Ports

 So here we go, with the configuration of DHCP snooping on a Cisco Switch. This feature protects the network by allowing the Cisco Switches to accept DHCP response message only from the authorized servers connected to the trusted interfaces in a Cisco Switch.

All Switch to  Switch connections are configured as 802.1 1Q Trunk ports.

IP Address and HSRP Details for the Core Switches  From the above scenario we have two Cisco 6513 Series Switches as a Core/ Distribution with three VLANS one for management of Switches VLAN 50,VLAN 100 for all the servers and VLAN 101 for clients. Two Cisco 3560 Series Switches as Server Farm Switches and a Cisco 3560 Series Switch as an Access Switch.There are two DHCP servers with an IP address 10.0.1.100 and 10.0.1.101 connected with Server Farm Switches with HP NIC teaming. We configure DHCP Snooping based on above scenario. 

The first step to configure DHCP Snooping is to turn on DHCP snooping in all Cisco Switches using the “ip dhcp snooping” command. 

All Cisco Switches (config)#ip dhcp snooping  Second step is to configure the trusted interfaces, from the above scenario all trunk ports are configured as trusted ports as well as the interfaces G0/7,(ITKESF01 50.0.0.6),  G0/17,(ITKESF02 50.0.0.7),  G0/9 ITKESF01 50.0.0.6)  and G0/18 ITKESF02 50.0.0.7)  connected to DHCP servers with IP 10.0.1.100 and 10.0.1.101. Lets configure all trunk ports in ITKEBB01 

ITKEBB01(config)#interface range  gigabitEthernet 3/21 - 23

ITKEBB01 (config-if)#ip dhcp snooping trust 

Now let’s configure all trunk ports in ITKEBB02 

ITKEBB02(config)#interface range  gigabitEthernet 3/21 - 23 ITKEBB02 (config-if)#ip dhcp snooping trust 

ITKEBB02 (config)#interface gigabitEthernet 3/16

ITKEBB02 (config-if)#ip dhcp snooping trust 

Now let’s configure the trusted ports for the DHCP servers  

ITKESF01(config)#interface gigabitEthernet 0/7

ITKESF01 (config-if)#ip dhcp snooping trust 

ITKESF01(config)#interface gigabitEthernet 0/17 ITKESF01 (config-if)#ip dhcp snooping trust 

ITKESF02(config)#interface gigabitEthernet 0/9

ITKESF02 (config-if)#ip dhcp snooping trust 

ITKESF02(config)#interface gigabitEthernet 0/18 ITKESF02 (config-if)#ip dhcp snooping trust 

Now let’s configure the trunk ports  Access Switch ITKEAS01 

ITKEAS01(config)#interface range  gigabitEthernet 0/49 - 52

ITKEAS01 (config-if)#ip dhcp snooping trust 

Finally we are going to configure VLANS for DHCP snooping DHCP snooping will used on all the VLANs (VLAN 100 & 101)except management VLAN 50 . Also we will limit the requests rate received in the Access Switch (ITKEAS01)  ALL SWITCHES(config)# ip dhcp snooping VLAN 100,101 

ITKEAS01(config)#interface range  gigabitEthernet 0/1 - 48

ITKEAS01 (config-if)#ip dhcp snooping limit rate 20

Displaying the DHCP snooping  

For further reference please do check this article from Cisco about DHCP snooping.

Nov 22 2008   7:22AM GMT

Why should we consider implementing DHCP Snooping?

Posted by: Yasir Irfan
Networking, Security, DHCP, Switches, Cisco, Switching, Cisco 2960, Cisco 2950, Cisco 6500, Cisco Tips, Cisco 3560, Cisco 3750-E, Cisco 3560-E, Err-disable, Cisco Systems, Cisco 6500 Series Catalyst Switch, Cisco 6503, DHCP Snooping

Dear FriendsIn my previous post I was discussing about the DHCP Snooping, it may be hard to believe a DHCP sever can lead to lot troubles in your network. Consider a host sends out DHCP discovery packets, it listens for a DHCP offers packets and accepts the first available offer from a DHCP server. Guess what happens if the host gets a DHCP offer from a rouge DHCP server? The host could end up with using rouge DHCP server with an IP address and the default gateway. The host cannot access any of the resources from your network. 

Yes we can prevent this with DHCP snooping thanks to Cisco. DHCP snooping classifies interfaces as either trusted or untrusted. DHCP messages received on trusted interfaces will be permitted to pass through the Cisco switch, but DHCP messages received on untrusted interface in a Cisco Switch results in putting the interface into error disable state. Configuring DHCP snooping in a Network is quite troublesome job but I will try to make things easier for you by using a scenario, which hopefully I am going post soon.

Nov 20 2008   7:54AM GMT

What is Dynamic Host Configuration Protocol (DHCP) Snooping?

Posted by: Yasir Irfan
Network Security, Security, DHCP, Switches, Cisco, Switching, Cisco 2960, Cisco 6500, Cisco Tips, Cisco 3560, Cisco 3745, Cisco Systems, Cisco 6500 Series Catalyst Switch, Cisco 6503, Cisco Catalyst 6503-E Switch, Cisco Catalyst 6506-E Switch, Cisco Catalyst 6509-V-E Switch, Cisco Catalyst 6509-E Switch, Cisco Catalyst 6513 Switch, DHCP Snooping

Dynamic Host Configuration Protocol (DHCP) Snooping is a security feature which filters untrusted DHCP messages, this security feature can protects the devices on the network from associating with an unauthorized DHCP server. When the Dynamic Host Configuration Protocol (DHCP) Snooping feature is enabled on a Cisco Switch , the Cisco Switch builds a table of MAC address, IP address lease time , binding type and interface information. In coming posts I will try to explain to how to enable and configure the Dynamic Host Configuration Protocol (DHCP) snooping security feature in a Cisco Switch.

Sep 1 2008   9:42AM GMT

Most Commonly used Network Layer Utilities

Posted by: Yasir Irfan
Networking, DNS, DHCP, Cisco, Certifications, Ping, ARP, CCNA, Cisco Tips, Cisco Learning, Network Layer Utilities, OSI Layer 3

I was just thinking about the most commonly used Network Layer utilities in day to day business. Here are they which are useful to guys who are aspiring for their CCNA.
1) Address Resolution Protocol (ARP)
2) Domain Name Systems (DNS)
3) Dynamic Host Configuration Protocol (DHCP)
4) Ping.

You can find more details about  Network Layer Utilities  in detail, how they work etc.