Home > IT Blogs > Network technologies and trends/

Network technologies and trends:

configuring Cisco Nexus 7000 Switch

1
March 23, 2011  6:13 AM

Telnet by default disabled in NX-OS devices



Posted by: Yasir Irfan
Cisco Command, Cisco IOS Commands, Cisco Switch tips, Cisco Tips, configuring Cisco Nexus 7000 Switch, domain name, how to enable the Telnet Server in NX-OS devices, IP Address, Network technologies & trends, Nexus 5000 and 2000 Series Switches, Nexus 7000, Nexus configuration, Nexus configuration tips, Nexus tips, NX-OS, remote device address, TCP/IP connections, Telnet

  As I am working with Nexus 7000, Nexus 5000 and 2000 Series Switches, I discovered by default  Telnet Server is disabled in a NX-OS devices such as Nexus 7000, Nexus 5000 and 2000 Series Switches. We all know Telnet protocol enables TCP/IP connections to a host. Telnet allows a user at...

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

January 5, 2011  6:05 AM

What happened to “write memory” IOS command in Cisco Nexus 7000 Series Switch?



Posted by: Yasir Irfan
Cisco Command, Cisco IOS, Cisco IOS command, Cisco IOS Commands, Cisco Nexus 7000 Series switch, Cisco Switch tips, configuring Cisco Nexus 7000 Switch, copy running-configuration startup-configuration, difference between IOS and NX-OS, IOS, IOS command, Network technologies & trends, Nexus configuration, What happened to “write memory” IOS command in Cisco Nexus 7000 Series Switch?, wri mem, write memory

When configuring Cisco Catalyst Switches, I quite often use "write memory" command to save my configuration rather than using "copy running-configuration startup-configuration" Cisco IOS command. Other day I was saving my running configuration to the startup configuration in a Cisco Nexus 7000...

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

December 29, 2010  5:27 AM

How to allocate physical interfaces to VDC in a Cisco Nexus 7000 Series switch?



Posted by: Yasir Irfan
32-port 10 Giga Ethernet Module (N7K-M132XP-12), 48-port 10/100/1000 I/O module (N7K-M148GT-11, allocate interface, Cisco Nexus 7010 Series Switch, Cisco NX-OS software, Cisco Systems, configuring Cisco Nexus 7000 Switch, Core Switches, Data Center, Data Center Switch, default VDC, Fabric Modules, Giga Ethernet, How to allocate physical interfaces to VDC in a Cisco Nexus 7000 Series switch, IP telephony, IPv4 router memory, IPv6 router memory, mission-critical, N7K-D132XP-15 module, Network, Nexus 7000 Configuration, Nexus 7000 Series Switches, port-channels, power supplies, show vdc, show vdc details, show vdc membership, SPAN sessions, Supervisor Modules, Ten Giga Ethernet interface, VDC, VDC1, Virtual Device Contexts

  To allocate physical interfaces to VDC from the config terminal mode type the VDC name and then allocate the physical interfaces as shown below by using the command "allocate interface" N7000-ITKE01#configure t

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

1