1
July 6, 2010 6:13 AM
Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabled
Cisco’s Enhance POE worked for power more than 20 watts
Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabledIn one of my previous articles I was talking...
0 Comments
RSS Feed
Email a friend
