June 22, 2010  5:53 AM

Cisco Enhanced PoE is the answer for delivering PoE in excess of 15.4W per port.



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabled

In my   Bookmark and Share     0 Comments     RSS Feed     Email a friend


June 21, 2010  9:13 AM

POE Compatibilty between Cisco 1252 Aironet Access Point & Cisco 3750 E POE Switch



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco IOS log, Cisco Switches, Cisco Tips, POE, radio interface, radios disabled

Recently one my colleague was trying to connect a Cisco 1252 Aironet Access Point without a power injector to a Cisco 3750 E POE Switch, but the device was not coming up, he was...


January 18, 2010  6:01 AM

Cisco AP 500 Series Wireless Access Points good for Small Business



Posted by: Yasir Irfan
802.11i, 802.11n, 802.1x supplicant, AP 541, Cisco Access Points, Cisco News, Cisco Systems, Cisco Videos, clustering technology, Gigabit Ethernet LAN interface, MAC address authentication, MIMO technology, Network News, Network Technologies and Trends, voice roaming, Wireless, WPA2, Yasir


August 22, 2009  8:46 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 6



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Catalyst 3560 Switch, Cisco Catalyst 6500 Series Switch, Cisco Configurations, Cisco IOS, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, IOS version 12.2(18) SXF14, IOS version 12.2(44) SE1, IOS Version 12.4(10b) JDA3, Multiple SSID, Native VLAN, Sample Configurations, SSIDs, VLANS, Windows 2003 Server, Wireless, Wireless Clients

In this post I will just post the snap shots for SSIDS ADMIN and GUEST, where you can see the...


August 18, 2009  7:47 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 5



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Catalyst 3560 Switch, Cisco Catalyst 6500 Series Switch, Cisco Configurations, Cisco IOS, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, IOS version 12.2(18) SXF14, IOS version 12.2(44) SE1, IOS Version 12.4(10b) JDA3, Multiple SSID, Native VLAN, Ping, ping command, Running Configuration, Sample Configurations, show running-config, SSIDs, VLANS, Windows 2003 Server, Wireless, Wireless Clients

 

Dear all lets proceed further with the configuration of the Cisco Catalyst 3560 Switch


August 17, 2009  5:40 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 4



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Catalyst 3560 Switch, Cisco Catalyst 6500 Series Switch, Cisco Configurations, Cisco IOS, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, IOS version 12.2(18) SXF14, IOS version 12.2(44) SE1, IOS Version 12.4(10b) JDA3, Multiple SSID, Native VLAN, Running Configuration, Sample Configurations, show running-config, SSIDs, VLANS, Windows 2003 Server, Wireless, Wireless Clients

 

In the


August 16, 2009  4:53 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 3



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Catalyst 3560 Switch, Cisco Catalyst 6500 Series Switch, Cisco Configurations, Cisco IOS, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, DHCP Server, IOS version 12.2(18) SXF14, IOS version 12.2(44) SE1, IOS Version 12.4(10b) JDA3, IP Address, Multiple SSID, Native VLAN, Sample Configurations, SSIDs, VLANS, Windows 2003 Server, Wireless, Wireless Clients

 

In today’s entry we will focus on configuration of VLANs and SSIDs in a


August 13, 2009  8:56 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 2



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Catalyst 3560 Switch, Cisco Catalyst 6500 Series Switch, Cisco Configurations, Cisco IOS, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, DHCP Server, IOS version 12.2(18) SXF14, IOS version 12.2(44) SE1, IOS Version 12.4(10b) JDA3, IP Address, Multiple SSID, Native VLAN, Sample Configurations, SSIDs, VLANS, Windows 2003 Server, Wireless, Wireless Clients

In order to configure multiple SSIDs in a Cisco Aironet 1250 Series...

Bookmark and Share     0 Comments     RSS Feed     Email a friend


August 8, 2009  6:18 AM

Configuring Multiple SSIDs in Cisco 1250 Access Points Series 1



Posted by: Yasir Irfan
Cisco Access Points, Cisco Aironet 1250, Cisco Aironet 1250 Access Point, Cisco Aironet 1250 Series Access Points, Cisco Configurations, Cisco Wireless, configuration scenarios, Configuring Multiple SSID in Cisco Access Point, configuring multiple SSIDs, HP 420 Access Point, HP 503 Access Points, HP Procurve, Multiple SSID, Sample Configurations, VLANS, Wireless, Wirless LAN Controllers

 

Recently we purchased plenty of


Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: