June 22, 2010  5:53 AM

Cisco Enhanced PoE is the answer for delivering PoE in excess of 15.4W per port.



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabled

In my   Bookmark and Share     0 Comments     RSS Feed     Email a friend


June 21, 2010  9:13 AM

POE Compatibilty between Cisco 1252 Aironet Access Point & Cisco 3750 E POE Switch



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco IOS log, Cisco Switches, Cisco Tips, POE, radio interface, radios disabled

Recently one my colleague was trying to connect a Cisco 1252 Aironet Access Point without a power injector to a Cisco 3750 E POE Switch, but the device was not coming up, he was...


1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: