Home > IT Blogs > Network technologies and trends/

Network technologies and trends:

%CDP_PD-2-POWER_LOW: All radios disabled

1
August 8, 2012  2:42 PM

What is the error “BUS_HDR_ERR: EARL L2 ASIC #0: Dbus Hdr. Error occurred. Ctrl1 0x930D0EBD” in Cisco 6500 Series Switch? – part 2



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, %DIAG-SP-6-RUN_MINIMUM: Module 7: Running Minimal Diagnostics..., %EARL_L2_ASIC-DFC9-4-DBUS_HDR_ERR: EARL L2 ASIC #0: Dbus Hdr. Error occurred. Ctrl1 0x930D0EBD

As mentioned in my previous post the error “BUS_HDR_ERR: EARL L2 ASIC #0: Dbus...

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

July 6, 2010  6:13 AM

Cisco’s Enhance POE worked for power more than 20 watts



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabled

In one of my previous articles I was talking...

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

June 22, 2010  5:53 AM

Cisco Enhanced PoE is the answer for delivering PoE in excess of 15.4W per port.



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, 12.2(35)SE5, 15.4W per port, Catalyst 3560-E switches, Catalyst 3750-E, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco Aironet 1250 requires 18.5W of PoE, Cisco Aironet® 1250 Series Access Point, Cisco Enhanced PoE, Cisco IOS log, Cisco IOS® Software Release 12.2(44)SE, Cisco Switches, Cisco Tips, IEEE 802.11n draft 2.0 standards, IEEE 802.3af standard, IEEE 802.3at (PoE+) standard, MIMO, POE, Powering the Cisco Aironet 1250, radio interface, radios disabled

In my

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

June 21, 2010  9:13 AM

POE Compatibilty between Cisco 1252 Aironet Access Point & Cisco 3750 E POE Switch



Posted by: Yasir Irfan
%CDP_PD-2-POWER_LOW: All radios disabled, Cisco 1525 Aironet Access Point, Cisco 3750 E Switch, Cisco Access Point error, Cisco Access Points, Cisco IOS log, Cisco Switches, Cisco Tips, POE, radio interface, radios disabled

Recently one my colleague was trying to connect a Cisco 1252 Aironet Access Point without a power injector to a Cisco 3750 E POE Switch, but the device was not coming up, he was...

  Bookmark and Share     0 Comments     RSS Feed     Email a friend

1