Network technologies and trends

Jun 22 2008   12:59PM GMT

Cisco Cool Tips – Series 1-Cutting and Pasting config via Hyperterminal

Yasir Irfan Yasir Irfan Profile: Yasir Irfan

If you cut and paste your config onto an IOS-based switch using Hyperterminal, it breaks down about midway. This occurs because Hyperterminal sends the text too quickly for the switch, particularly if a command returns a message, such as portfast. To avoid this, in Hyperterminal, select File – Properties; click the Settings tab, click the ASCII button, and add a character delay of 5 milliseconds. You should now be able to cut and paste your config successfully.

Yasir
Personel WebSite:www.yasirirfan.com

Comment     RSS Feed     Email a friend

 Comment on this Post

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when other members comment.

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

Share this item with your network: