February 8, 2011 3:35 AM
Posted by: Sulaiman Syed
Cisco,
how,
how mpls works,
ip,
label,
LDP,
LFIB,
MPLS,
network,
pop,
push,
QoS,
tag,
Unicast,
worksMPLS protocol uses a different mechanism to forward packets. Packets are sent based on MPLS lable instead of the conventional packet's destination IP address. It add the ability to make forwarding decisions based on other factors beside the IP address, such as traffic engineering, QoS, and privecy...
December 7, 2010 2:59 AM
Posted by: Sulaiman Syed
access,
CCNP,
Cisco,
ip,
list,
map,
network,
route,
subnetIP prefix list mostly used with route filtering in IGP (OSPF, IS-IS, EIGRP) and EGP (BGP) protocols. At first sight, the command will look confusing, but it is pretty simple and straight forward.
Prefix list can be used with route map, and they would be referred...
October 27, 2010 3:46 AM
Posted by: Sulaiman Syed
access,
Cisco,
core,
design,
distribution,
ip,
network,
routed,
scheme,
subnet,
trunk,
vlanIn this part, I would talk bout the migration from current network, to the proposed network.
Figure 1 shows a core layer with two distribution layer, the one on the left is current, and the one on the right is the proposed. Before explaining any further, take note that although user vlans were...