The Journey of a Network Engineer:

October, 2010

1

October 31, 2010  2:39 PM

From trunk ports to routed ports – part 3

Sulaiman Syed Profile: Sulaiman Syed

This is the final part of the series. In this blog entry, I would post the sequence and the configuration lines that are needed to be done in order to have smooth transition from trunk ports to routed ports. The Bookmark and Share     0 Comments     RSS Feed     Email a friend

October 27, 2010  3:46 AM

From trunk ports to routed ports – part 2

Sulaiman Syed Profile: Sulaiman Syed

In this part, I would talk bout the migration from current network, to the proposed network. Figure 1 shows a core layer with two distribution layer, the one on the left is current, and the one on the right is the proposed. Before explaining any further, take note that although user vlans were...


October 23, 2010  11:59 PM

How to Configure Router on GNS3 to work with SDM.

Sulaiman Syed Profile: Sulaiman Syed

This is pretty basic configurations that can be done on GNS3 router, or any router that it matters. it is useful for first time users, or who wants to practice CCNA security. on host do the following settings:

IP address: 10.0.0.10 Subnet Mask:...


October 23, 2010  1:37 AM

From trunk ports to routed ports – part 1

Sulaiman Syed Profile: Sulaiman Syed

In this post I'll talk about...


October 15, 2010  12:21 PM

Issues with VTP

Sulaiman Syed Profile: Sulaiman Syed

Although Vlan Trunking Protocol does its job in distributing vlan database from server to all the other client switches.  It has some major issues when wrongly implemented or trunk negotiation between switches. 1- Always reset the revision number of a switch before adding to production network....


October 11, 2010  6:48 AM

Connecting your PC to GNS3

Sulaiman Syed Profile: Sulaiman Syed

In this entry, we would see how to connect a router from the GNS3 simulator to your pc. This will help you with all the basic simulations using SDM, it is specially good for people taking the CCNA Security exam. First, we would need loopback interface in your PC. The following steps are used...


October 7, 2010  8:53 AM

Cisco Certified Design Professional

Sulaiman Syed Profile: Sulaiman Syed

CCDP or Cisco Certified Design Professional is one of the best certificates for any engineer working in middle to large enterprise. CCDP requires the candidate to pass Route,


October 1, 2010  10:55 AM

Policy Based Routing – Part 2

Sulaiman Syed Profile: Sulaiman Syed

In Policy Based Routing - part 1 I have explained why and how we can use PBR in production environment. Today, i shall post...


1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to: