I have 2 network cards in the server.
External Accessing the Internet
Sorry getting used to this text editor:
HI Alessandro, Full explanation of problem here. I have Windows 2000 server SP4 but it is still in a workgroup (i inherited all this) I have configured the cards as below. The client pc’s pick up IP address from the DHCP and can access shared folders etc on the server but cannot browse the internet. Can you check DNS but what settings do i do in Routing and Remote Access!!
External NIC going to Internet
D/G 192.168.1.1 (Lan side IP address of Netgear Router
DNS 192.168.1.1 (not sure if this is right but server can access internet)
Internal NIC for network
DNS 192.168.1.1 (not sure again if this is right)
DHCP on server
IP range 10.0.0.2 – 22 (only very small office)
MOVED/MERGED BY MODERATOR
Original post by Alessandro.panzetta
Could you please post the network configuration?
To do so please do:
- Click START, select RUN, type CMD and press the ENTER key
- Type IPCONFIG /ALL and press the ENTER key
- Right click and select MARK
- Drag a square on all the result text and press ENTER
- Paste the text you have copied here.