Windows server 2003 home network needs help

25 pts.
Tags:
Home network
Linksys Routers
Windows Server 2003
Windows Server 2003 administration
Wireless in 2010
I am setting up a network at home under Win 2K3 and I am not sure of the settings. Can someone validate what I am doing?

My Cable modem goes into a WIFI linksys WRT53G router (its IP is 193.168.1.1). The router goes into a hub in which are connecting 3 workstations and the 2K3 server. The server will act as a DC, DHCP and IIS. The server IP is 192.168.1.10, Mask 255.255.255.0, gateway (the router) is 192.168.1.1 and the DNS is 192.168.1.10

Is everything ok? Thank you

Answer Wiki

Thanks. We'll let you know when a new response is added.

I would be inclined to use switch instead of hub. Also, set the DNS on router to ISP provided DNS or other outside source such as OpenDNS. Then set the DC DNS with forwarder set to the outside DNS as well. Let the server provide inside DNS to clients

————————–

Agreed – lose the hub, (switches are better and inexpensive), point DNS from your server to something outside your network and the rest sounds fine…

Discuss This Question: 6  Replies

 
There was an error processing your information. Please try again later.
Thanks. We'll let you know when a new response is added.
Send me notifications when members answer or reply to this question.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy
  • GregBMe
    Actually, the 53G has 4 switch ports for wired connections.
    60 pointsBadges:
    report
  • shanekearney
    I would also do what Spadasoe says, a switch would be better but if you dont have one a hub would suffice. Let me know if you need help setting up DNS and I will give you a dig out Shane
    810 pointsBadges:
    report
  • Chippy088
    If the router has 4 ports, why use a switch or hub. That makes a 4 device collision zone. The 4 ports on the router are individual zones, so routing will have fewer collisions. What do you mean that the router ip is 193.168.1.1 this means it is on a different network to the server and workstations, as they are on the 192.168.1.xxx network. (I guess it is a typo.) Ditch the hub and connect the server and workstations directly to the 4 ports on the router, and allow dhcp and dns to do its job. Unless you require static ip's for the workstations. (I think it is better to use a static ip for the sever.) Hope this helps
    4,625 pointsBadges:
    report
  • Johnstockman
    I have installed a number of similar small networks with Windows Server and consumer-grade routers linke the Linksys. Be sure to disable the DHCP server on the router if you are planning on the Server providing the DHCP services.
    325 pointsBadges:
    report
  • Alvela
    Yes the network configuration is ok.
    10 pointsBadges:
    report
  • Hlx
    Everything looks good on your addressing and such. As others have said, you should probably ditch the hub in favor of the linksys 4 switch ports.
    690 pointsBadges:
    report

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following