VoIP Tag Directory

Featured VoIP Questions

  • Voice and Data Network Setup

    I have two ISP's. One strictly for Voice data and the other is strictly for Data.  I have about 40 users with 40 7961G Cisco IP Phones.  I have one Cisco 48 port POE switch, and I have two Gateways (one for each ISP). How do I setup a network that will: 1. have all the voice traffic go over the...

    Arshad1605 pointsBadges:
  • Cisco VOip

    if one DhCP server is at head quarter one branch has SRST gateway it is connected through WAn only if Wan goes down then IP phone at branch will survive through SRST or Not

    jhdsdjksdsaljkljlkl10 pointsBadges:
  • Cisco 7965 and remote SIP server not working

    Hey guys, I have this very weird problem and I just can't fix it.. any ideas would be very appreciated! I have a Cisco 7965 ip phone here on my desk. I have a tftp + sip server running in a datacenter and it seems the phone fetches all the data from the tftp, but can't connect to the SIP server....

    Chrisss15 pointsBadges:
  • what if a user can make calls but can not receive?

    what could be the reason that a user is receving calls successfully but can not receive calls? I think it could be releated to Calling search space;but don't know the exact answer. if any body can please explain

    OneTwoThree1235 pointsBadges:
  • Avaya CM SIP trunk to Cisco Unity Connection

    Has anyone successfully gotten MWI to pass from Cisco Unity Connection to Avaya CM over SIP trunks?

    Jmac90685 pointsBadges:
  • Cisco VoIP phone DID not setup for outside calls?

    I have three Cisco 7940 VoIP phones I am trying to setup for new users. The phones won't receive calls from outside lines and only show the four digit extension on the screen rather than the entire phone number. I believe this is because the DIDs are setup for internal use. How can I verify that...

    Nhawkins5 pointsBadges:
  • where is the Pause in Cisco????

    Hello Friends Anyone can share with me there idea’s of Route Pattern for speed dial????????? A. Usually in Cisco Unified Call Manager Speed dial number its working perfect, everyone knows this Pattern is 9.8XXXXXXXXX Speed Dial and Abbreviated Dial Configuration Speed setting 1. 98001245444...

    Taher10 pointsBadges:
  • Audio Codes (MP114 SIP) with Cisco call manager

    I have CCM 6.0 and have audio codes box, When i make an out going call from AC box it is working smooth but when i want to make an incoming call on AC box from an IP phone i m getting fast busy...were as call from ac box to IP phone is fine... PLease help

    Rajesh03padwal5 pointsBadges:
  • Cisco 2960s switch port config voip with Avaya phone

    Need to know what the switch port configuration would look like for a cisco 2960s switch with an Avaya ip 9611G phone and pc connected to the phone.

    rsc11110 pointsBadges:
  • Administration for Cisco UC500-series, resource recommendations

    I have recently found myself supporting a multi-site setup including a Cisco UC560, a 540, and a 520, and have been muddling my way through the adminstration so far. However, I am sure there is a wealth of knowledge that I am missing out on, and would like to fill in some gaps in my skillset. I was...

    Zaltec15 pointsBadges:
  • Who uses Gigabit Ethernet for IP Phones, is this just IT herd mentality?

    Looking at general VoiP deployment and IP telephones, I see a wide reference to Gigabit ethernet almost as if it is the standard interface. It is being specified in tender responses as a must have. Reality seems to indicate that Gigabit to the desktop is not standard and rarely used in enterprises...

    Etljnoy15 pointsBadges:
  • Cisco IP phone – Can’t receive external calls

    Using a Cisco 7961 IP phone and Call manager. I have loads of these working all over the world, yet I have one that receives and makes internal calls without issues, also makes external calls, but can't receive external calls. Everything looks like it is set up as all the others in this location....

    RichWednesday5 pointsBadges:
  • Asterisk setup options

    I am all-too-familiar with the Cisco CME/UC set-ups for VOIP, and have come across a lot of folks using Asterisk set-ups. My question is: what is the most popular (in use, supported, feature-filled) flavor of Asterisk currently?

    Sixball8,685 pointsBadges:
  • Call Divert to Mobile for non UCCM User using Cisco Voice Gateway

    Hi, I have a requirement for a DDI number to be on permanent divert to a mobile.  The user does not have a account on the call manager, nor does he need one.  I just need to provide a Land-line number so it can divert to his mobile.  What is the best way for me to achieve this with the lease...

    KiNNik5 pointsBadges:
  • Cisco VOIP

    merging data and voice network We hae seperate Data and voice network. For data network we have interface vlan 1 ip address 10.91.192.0/24 in one core switch 4506. For voice network we have interface vlan 1 172.20.1.0/24. Now i am going to merge data and voice network. But vlan 1 on these core...

    Ekansh400 pointsBadges:
  • What’s the best way for me to make the switch to VoIP in a small office?

    I'm looking to move away from the landline in our small office and port the number to a VoIP, Internet-only phone service. I'd like to have just one number and be able to call a few different extensions around the house. Would a few of the Cisco 7960G Unified IP Phones do the job? What else would I...

    ITKE344,900 pointsBadges:
  • Internet Explorer Add-on for Call Manager

    Is there an Internet Explorer Add-on for Call Manager? I would like to install something similiar to Skype that would recongnize phone number's that you can click on and it will call using the Cisco IP Phone.

    Jlandreneau5 pointsBadges:
  • Two difference voice mails on one Cisco IP phone

    Set up two lines with separate voice mail in one ip-phone in Cisco unity 2.0 1st extention voice mail works. 2nd extension voice mail does not play messages. What am I doing wrong?

    Petaw975 pointsBadges:
  • How to configure PAGING on CM?

    I am having CUCMBE, 7828-i4 unified call manager bus edition WL 7.0 and i want to configure paging on my CM so I can broadcast a message to all users at a time. is there any possibility ??? please send a copy of your reply on kraheelw@hotmail.com Thank you and best regards.

    Kraheelw5 pointsBadges:
  • Participation control in Meet Me Conference

    dear all, i have cisco call manager 7.0 and cisco unity express integrated with it how can i know my participates in meet me conference and how can i accept or remove some participate from conference ? thanks in advance

    Makashik5 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following