Networking Tag Directory

Featured Networking Questions

  • DSL service to 2811 router

    Can a DSL service provide voice to Cisco 7961 phones through a 2811 router?

    DGJ5 pointsBadges:
  • How do I get into the switch portion of a Cisco 2811 if I forgot the password?

    How do I get into the switch portion of a Cisco 2811 if I forgot the password

    Oneofknowledge5 pointsBadges:
  • Configuration Lease Line And V-Sat on same Router

    Hi, I have 2600 series router in which I have configured one Lease line.now I want 1 backup line so that i will not face any Connectivity issuse for that company has provied me V-SAT connect, now how can I configure that on the Router. Please help me.

    Deveshbais10 pointsBadges:
  • Cisco Easy VPN Problems Nat outside on Static IP

    Thanks in advance for any clues, direction or help!!! My problem is that I can’t get my Easy VPN up and running!!  I get an error from my iPad saying “The VPN Server did not respond” I think that the issue is that I don’t know how to set up the WAN - interface to accept VPN request and get...

    larsarler5 pointsBadges:
  • Cisco router 2811 ipv6 configuration

    hi, can someone help me out how to configure ipv6 on fastethernet n serial interface? thanks.

    Vm8185 pointsBadges:
  • How to configure Cisco 2811

    How configure cisco 2811 for my small network with two c class ip serieses; keeping the valid security; and configuring ADSL and ISDN module in cisco 2811; from scratch ... step by step

    RizGhauri5 pointsBadges:
  • Cisco 3500 Switch How to configure

    I've been given a Cisco 3500 XL Switch. Question is what can i do with it? I was hoping to split the ports into VLAN's for a start preparing for CCNA exams. Up to now I've mainly done book work. I want to get my 'hands dirty'. Is this a manageble switch ...? - i dont know. I've tried Consoling into...

    Pelvicthrust170 pointsBadges:
  • Can i convert a traditional switch to an open flow switch?

    How feasible is it to enable openflow on a 2811 Cisco Router for SDN environment?

    Chingacham5 pointsBadges:
  • Can’t enter ROMmon mode in Cisco router 2811

    hi i have cisco 2811 router and when i try to enter in rommon mon not possiable i try all but useless on console mod just garabge plese help

    Alca5 pointsBadges:
  • How to delete router configuration

    I have a Cisco 2800 router and I tried to delete all the old configuration but its not deleted. Any idea about this problem?

    Mohadbazzi47170 pointsBadges:
  • Features of the new Cisco 2960-X series

    What's the nicest feature of the new Cisco 2960-X series?

    RouterCiscoSwitch00735 pointsBadges:
  • Router Cisco 2800

    How to restore iOS Cisco router 2800 card reader?

    abdoukh5 pointsBadges:
  • Converting fron a cisco 1841 router to a Cisco 2900 router

    My IT group bought me a 2900 series router to replace my 1841.  How do I copy the program from the 1841 and paste it to the 2900?  The reason for the change is due to needing more external ports.

    wyowool5 pointsBadges:
  • cisco-IOS

    In my office campus there are more then 500 cisco-2960 and 3750 switches present. I want to keep one TFTP server in our datacenter loaded with all the switches IOS in it, So that if any of the switch's IOS in campus get corrupt due to some reason, It should boot from the IOS kept on the TFTP...

    Win0315 pointsBadges:
  • How to Connect Branch Office?

    We recently initiated a branch office setup in the same city. (Setup is still in process) Currently in Main branch we are using Cisco 2800 series router and Cisco 6500 series Core Switches. Similarly in Branch Office, we have one Cisco 2800 series router and some POE switches. In order to connect...

    Makmaniax15 pointsBadges:
  • IP SLA command does not exist

    I have two routers, one 1721 ( version 12.4) and 2801 (version 12.3T). I want to configure IP SLA, but when I write the command in the CLI router# IP SLA, the command does not exist. What happened? How do I activate the command? thanks

    Techcol5 pointsBadges:
  • How to configure two Cisco 2600 routers

    Hi, we have two Cisco 2600 routers, one deployed in our main office and the other in our remote site. We also have two DSL connections. We have our Exchange server in main office. Q1. How to configure the two router to use the 2 DSL connections that we have? Q2. How to route our exchange server to...

    Killerj5 pointsBadges:
  • Configure and deploy network with Cisco 2600 router

    I've tried configuring a router for a network with 98 hosts. I'm using Network Visualiser 4.0 by Routersim. But I'm not getting it done at all. Is there any other means, methods, techniques in configuring routers for such office building network. Or any suggestions on how to configure and deploy...

    LESHTEK5 pointsBadges:
  • Cisco 2811 – Divide Bandwidth for networks

    We have Cisco 2811 router with on serial interface and four fast ethernets. We planned to take 10 mbps Internet leased line and we have to divide it into two parts. For one network is should be 6 Mbps and the rest bandwidth for another network. Can any help in this?

    NWEA55 pointsBadges:
  • Cisco 2811 configuration for managing HTTP and other traffic through two connections

    Hi all, I have one Cisco 2811 router with serial interface for leased line connection to internet and an adsl wic for Internet connection too. What I what is to do is let HTTP traffic goes through the adsl connexion and other traffic go through the leased line. Is it possible and how? Thanks

    AKN15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following