• direct URL traffic to alternate gateway

    hi folks been snagged on an issue that I just keep hitting my head against. i have 2 gateways in place. 1 is my default and the other gateway (router) is used only for one web application for specific users. The primary gateway is used for all internet traffic except for this specific web app which...

    Defector45 pointsBadges:
  • Connecting two routers on the same network to extend range

    Can I connect 2 wireless routers on the same network to extend the range of the network? What changes will I have to make and what routers would you recommend?

    ITKE1,026,785 pointsBadges:
  • Results of two wireless clients logging into the same network with the same static IP

    If two wireless clients log on to the same network and both have the same static ip configured for the wireless adapter and they log on at the same time what will happen? Will either be able to use it? Or both intermittently? Is there a way to protect from this? We use static ips around here for...

    ITKE1,026,785 pointsBadges:
  • Wireless Network Bypassing

    hi i have one wireless Linksys usb network adaptor , i connect it to my Laptop after getting signal internet start normally .know question is that i want to use my laptop as a wireless repeater .( like attach one router to laptop and getting signal in my place) actually in my room there is very...

    Danial370 pointsBadges:
  • 2010 Office sync with PDA

    I'm upgrading Office 2003 to Office 2010. Before I install 2010 Office Professional Pro for XP service pack 3, I need to know will it be a compatible sync with PDA Ipaq x2400 series with Windows 5.0

    LibertyMD5 pointsBadges:
  • Best practices involving admin rights for user on user system

    We are currently in the middle of figuring out the approach we are going to take in regard to a user having admin rights on their system. Typcially we set up a new user as an administrator on their system when they are logged into the domain. They don't have a local admin account on the system,...

    Kevins740 pointsBadges:
  • How can I configure a connection by pppoe on a Cisco 2600 Router?

    please can somebody help me to find out the way i can configure a connection by pppoe on a Cisco 2600 Router?

    T8sta5 pointsBadges:
  • Has any one used trafficsqueezer?

    Hi there, I was looking to do some testing with trafficsqueezer (http://www.trafficsqueezer.org/Doc_FAQ.html) It's an open source network accelerator and before I start testing just wondered if anyone had used it and had experience or if it actually works? Cheers Rick

    RickC495 pointsBadges:
  • Can I connect to a server over Bluetooth?

    I have a laptop that has Bluetooth and wifi. My server also has Bluetooth. Can I connect to the server using Bluetooth? Is it more secure than over wifi? Will I be able to open a telnet or mstsc session over Bluetooth or just transfer files?

    ITKE1,026,785 pointsBadges:
  • Disabling wifi capabilities in corporate desktops

    Our latest shipment of corporate desktops have wifi. We want the machines only to be able to connect with a wired connection and only via dhcp. Can I do this via group policy and force these options? I want to make sure no one can change the settings manually.

    ITKE1,026,785 pointsBadges:
  • Extending wireless internet across large property

    I have a large property and want to extend my wireless internet throughout. I assume I need wireless repeaters but how can I effectively connect them together as well as find hardware that can live outside in some sort of case to supply the pool area? I have one 10Mbit line coming in and that goes...

    ITKE1,026,785 pointsBadges:
  • What does Internet2 have to do with IPv6?

    What do Internet2 and IPv6 have in common? Does Internet2 have anything to do with IPv6?

    SearchEnterpriseWAN1,565 pointsBadges:
  • Can I buy an IPv6 address?

    Can I buy an IPv6 address? How does the purchasing process work? I heard that ARIN will give enterprises IPv6 addresses for free, but is this true and what are the conditions?

    SearchEnterpriseWAN1,565 pointsBadges:
  • Connecting to VPN over an unsecured network

    When connecting to a remote VPN over an unsecured network am I putting the VPN server at risk when transmitting credentials? What is the preferred method of connecting to VPN over unsecured network?

    MelanieYarbrough6,345 pointsBadges:
  • Using wireless for active directory connection

    Is using wireless as the connection method for our active directory server a bad idea? The server is across the hall from the server room and we do not want to run cables. Bandwith is not an issue and the signal strength is good. Is there a reason to not do this?

    ITKE1,026,785 pointsBadges:
  • Bridging mode on a LinkSys router

    What is bridging mode on a linksys router and how does it differ from using signal extenders. Is this a good way to add routers to remote parts of my network to extend the signal? We have a big mix of OSes and machines connecting to the network and we have points where the signal does dwindle down...

    ITKE1,026,785 pointsBadges:
  • How can I see what users are connected to my wireless network?

    How can I see what users are connected to my wireless network? I am running a sonicwall tz170 for wireless connectivity. Is there a place I can see which machines are connected? Host name and dynamic IP? Can I export this information as well?

    MelanieYarbrough6,345 pointsBadges:
  • PPTP using Vodafone Ireland and EchoLife HG556a dsl router

    Hi All, I have started pulling my hair out over the last few nights and now have a bald patch on one side of my head..... Ok not really but I feel like pulling my hair out, I have this problem you see, it is something I have been working on for a while just for fun. I have a Windows Home Server in...

    shanekearney810 pointsBadges:
  • Multiple Subnet Routing Hardware

    Please feel free to direct me to previous post if applicable. I have searched all over this site and others to try to find specifics. I have a business network 192.168.10.0 that all of the PCs and two windows small business servers run on. I have a separate network 192.168.1.0 that my...

    Firebird00955 pointsBadges:
  • The Great Debate: 2.4 GHz or 5 GHz for WLAN?

    We're curious as to the real-world comparisons between .11n and previous iterations. If you've looked at upgrading, has it been as expensive as you thought it would be? Make the case for 2.4 GHz, 5 GHz or a dual band network here. This discussion inspired by a Search Networking article by Shamus...

    MelanieYarbrough6,345 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

Thanks! We'll email you when relevant content is added and updated.

Following