• What subnet mask should I use on my IP range?

    What subnet mask should I use on my IP range if I only need 100 IP addresses? Is 255.255.255.0 still ok?

    Troubleshooter24755 pointsBadges:
  • Using wireless router stand alone

    Once I have configured my wireless router with a network connected desktop, can the  wireless  router be run stand alone and utilized only  with my laptops that are prewired with wireless?  The desktop will be disconnected.

    Geeeceee5 pointsBadges:
  • How to limit max amount of connections per ip on cisco 2811 router

    I wish to limit max 100 tcp connections per internal ip address. Thanks

    Hywl515 pointsBadges:
  • Assigning wireless encryption

    What methods of assigning wireless encryption codes to our users do we have? I want the process to be automated where they connect to the network and see a web page where they can log in and retrieve their codes. What options do I have?

    TeachMeIT975 pointsBadges:
  • Is it possible to share internet via wifi router just like adhoc connection?

    Is it possible to share Internet to other computer via wifi router if I have a wireless 3gusb which can be connected only to 1 computer?  I have 3g wireless usb stick to connect to internet. I can connect to only one computer. I have 2 laptops wifi enabled and a wifi router. Is it possible to...

    Davidjose235 pointsBadges:
  • Roaming Profile with Wireless Connection

    On our school network we have wireless access for the principal and the teachers who use laptop computers. The server runs Windows Server 2003 and all clients run Windows XP Pro. The school is in two different buildings and the principal and computer teacher both travel from one building to the...

    Yankusbobicus120 pointsBadges:
  • Need a stable wireless router – what one to get

    I currently have a D-Link WBR-2310 serving as the outside router for my network, and it likes to reboot irregularly. Sometimes it reboots a couple times a day, causing disruptions for our users who complain mightily. I've updated firmware to the latest (v1.05) and it continues to reboot...

    Fishmahn55 pointsBadges:
  • Safe@office, Securemote issues

    Hello everyone - I'm hoping somebody out there can point me in the right direction. We just replaced our aging Checkpoint firewall with Safe@office 500 (waiting for the powerpack right now though). We use Securemote to vpn in and although that works just fine after recreating the site, we've had an...

    Lirria0 pointsBadges:
  • Logical wireless extension to my corporate network running Cisco equipment?

    What is the logical wireless extension to my corporate network running all cisco equipment? We need to extend an outdoor portion of the network and want it to integrate with the rest of the network seamlessly.

    Troubleshooter24755 pointsBadges:
  • Best enterprise level wireless device?

    What is the best enterprise level wireless device? We have been looking at cisco and sonicwall. What would you recommend to serve up wireless connections for about 3000 users across a 300 acre spot? We want to blanket the community in wifi and have access available everywhere. If there are low...

    ITKE352,580 pointsBadges:
  • DNS log filling with errors in Windows Server 2003

    I have a problem that is really driving me crazy at the school where I provide technical support. I think it is a DNS issue that I can’t seem to resolve. My DNS event log is filling up with errors (well – warnings) but I think that are really causing problems. They are Event ID 3000, Event ID...

    Yankusbobicus120 pointsBadges:
  • Driver problem

    Dear Sir,   i have HCL company Leaptop Model No. 41 Series and i am using the window xp professional. but the wireless driver not properly working. i am connect the internet by wire and update the driver but when i on the switch of wireless. no access of  wireless internet. i download the driver...

    Jlkjlds220 pointsBadges:
  • Limiting remote administration terminal sessions

    How can I limit my remote administration terminal sessions to only the console session? I mean one connection period for administration. If I connect to the terminal I want it to kick off any remote users like on the XP desktop. This is Advanced Server 2003 – Windows.

    TeachMeIT975 pointsBadges:
  • need Linux server for file replication at branch office…recommendations?

    I have a branch office that is a little over an hour away from our main facility. Due to bandwidth issues, our remote users are reluctant to store their documents on our shared file access on the server at our main location. It can literally take 20 minutes to get a file to open! So, aside from...

    Koohiisan5,020 pointsBadges:
  • Opposite of a Wireless Router to act as a switch

    I need the opposite of a Wireless Router. I have a wireless network set up, but My pc workbench is across the room and I how have a cat5 cable running across the floor into a switch that I can then connect to the wired desktops that I am working on.   I would like to have a contraption that would...

    Woeisme5 pointsBadges:
  • VPN Connectivity Problem

    I connect to mobile software through an embedded Verizon aircard and a cisco VPN. I am losing connectivity to my mobile software I disabled the Wi-fi and wireless Bluetooth connections Here’s how I connect to the software: I  connect to the aircard and the VPN successfully I then connect to the...

    Luvpennstate5 pointsBadges:
  • How to configure two default gateways to be 2 ISP (PIX 525)

    I have a network as follows: PIX Firewall 525 uses three network interface Ethernet1, Ethernet2, Ethernet3. E1 (10.0.0.1, Inside) connected to LAN E2 (117.16.126.35, Outside) connected to the modem (117.16.126.33) ISP1 (This address by the ISP level) E3 (192.168.1.2, Outside2) connected to the...

    Arowana200015 pointsBadges:
  • Script IP address depending on network or location

    How can we script IP addresses to change depending on location? If a user connects to a specific wireless network set the IP address but if it the ssid is not recognized it leaves dhcp on. Can this be done on a Windows 7 computer?

    Karl Gechlik9,860 pointsBadges:
  • windows password question

    I recently purchased a computer from a "going out of business" sale for my fathers business and when I try to logon to Windows I get the logon screen with domain. I have a valid username and password but obviously i am not connected to a domain. I need to bypass this if possible. The safe mode...

    Minxcomp10 pointsBadges:
  • Unable to Telnet to SCO Unix server

    help please. i recently installed a new cisco router at one of our branches. i am able to ping the head office router and other hosts on the head office lan except the sco unix server. i added a route to the new site in the etc/hosts file but still i cannot telnet or ping the new remote site form...

    Twkays15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following