how a wireless client (A) associated to Access point will communicate with a pc (B) connected to the ethernet port of the same Access point.
I have a network scenario like this A (wireless client)    AP—–B (wired) When sending a packet/data from A to B, what is background process that happens between A->AP, AP->B and vice-versa. It would be great if someone can explain at packet level

Answer Question   |  January 29, 2010  10:15 AM
Wi-Fi, Wireless, Wireless networking, WLAN, WLAN access points

Problem with installing Hawking Wireless-G High-Gain USB Dish – Please help!!!
Hi there guys, I recently got hold of a Hawking HWU8DD High-Gain Wireless-G Dish Adapter (Rev.B), But I’nm having a bit of a problem installing it. The software on the CD installs fine, but when I connect the device to the PC and it detects the new hardware to install, it fails to install the [...]

Answer Question   |  January 14, 2010  4:06 PM
Dish, Hawking, HWU8DD, Networking, USB, Wireless, WLAN

wireless to wireless connectivity (Cisco WAP4110N)
Hi, Can somebody tell me the step by step procedure on how can I connect my 2 Cisco WAP4110N? One of which is connected directly to the switch and the other one is supposedly communicate with the WAP(connected to the switch) to broadcast its SSID. TNX..  

Answer Question   |  January 8, 2010  1:25 AM
Cisco, Wireless, Wireless Access Points, Wireless connectivity

Wireless router on different Subnet
Here’s what I’ve got. 2 internet connections router 1: 192.168.10.1 router 2: 192.168.11.1 bothe connect to a load balancer at 192.168.254.254 SBS server acting as DHCP on the 192.168.254.X scope router 1 is a wireless router (netgear WGR614v9) When i try and connect to the wireless, i cant get an IP/Connection. I presume this is [...]

Answer Question   |  August 30, 2012  12:25 PM
DHCP, Netgear WGR614, Network Configuration, Subnets, Wireless, Wireless network management, Wireless networking, Wireless routers

Help Removing Wireless connection in a Gatewat T-Series (MSVistahome)
I have lost the facilities to completely remove a wireless connection router … LOL Some time ago I do remember doing this task, but I have worn this path down to rock running in circles on this one trying to find & remove it. —From control panel/network & sharing/manage Wireless I get to “manage” networks using that [...]

Answer Question   |  October 27, 2009  5:02 PM
Network, Network administration, Network applications management, Network connectivity, Network design, Network management software, Network monitoring, Network performance, Network protocols, Wireless, Wireless Access Points, Wireless networking, Wireless routers

how to update to usb high speed controller for usb wireless device
I HAVE A…  INTEL(R)CELERON(TM)CPU 1200MHz 1.20GHz. I’m running Windows XP Professional Version 2002 service pack 3 .  I have a wireless device hooked up thru my usb port . Intel 82801BA/BAM USB Universal Host Controller – 2442 an a 2444 witch are standard  USB Controllers . I want to Know how to get a high speed [...]

Answer Question   |  October 19, 2009  9:58 AM
USB, USB 2.0, Wireless

Wireless
Sir , I have to install a point to point RF link between 2 location wiht the capactiy of E1 or 2E1 . so cud u pls cuggest me what are the best products to install a point to point E1 or 2E1 or 100 Mps capacity for IP Network . Thank you Teh student.

Answer Question   |  September 12, 2009  7:56 PM
Wireless

is it possible that two different technologies (adhoc and ethernet ) work at same time on Data Link Layer
supose we hv 3 systems. centerlised system hv 2 lancards. one PCI card of realtek and second wireless of linksys. PCI card ip address is 192.168.1.1 and its connected system ip address is 192.168.1.2. wireless lancard address is 172.168.15.1 and it connected wd other wireless system address 172.168.15.2. now the question is can 192.168.1.2 ping [...]

Answer Question   |  October 28, 2009  11:27 AM
Ad Hoc, Data-Link layer, Routers, Wireless, Wireless networking

Wireless network lease span
Hi, what happens when the lease for my wireless network expires how do I set the lease time span for my wireless network? Can I set it to infinite? I am using a TP-Link TL-WR542G wireless router. Thanx.

Answer Question   |  June 29, 2009  5:04 PM
DHCP Lease Renewal, DHP, TP-Link TL-WR542G, Wireless, Wireless Network, Wireless network management, Wireless routers

Cisco Wireless 1200 DHCP Issues
Ok, I have seen this same issue on several message boards etc. but I have yet to find a good answer so here it goes. I have a network with 12 Cisco 1200 series access points all connecting to 3550PWR switches. The switches are configured with 2 vlans, one for a public wireless LAN and [...]

Answer Question   |  June 29, 2009  3:20 PM
Aironet 1200, Broadcast, Cisco, Cisco 1200, Cisco Routers, DHCP, VLAN, Wireless

Wireless PCMCI lancard Driver Required
Hi Pls help me to find My ( Dlink Air Plus Xtreme G 2.4ghz High Speed Wireless Cardbus Adaptor DWL-G650 Driver ) i try it to download on Dlink website But it not work pls help me to find driver or is any one have pls share it thanx

Answer Question   |  June 25, 2009  6:23 AM
Drivers, Wireless, wireless PCMCI lancard

Email: PC to laptop via wireless.
I have cable internet to home PC and wireless from cable to laptop. Laptop does not receive all the same messages as the PC. Why????

Answer Question   |  December 22, 2009  2:25 AM
Email, Laptop screens, PC, Wireless

Routing Public Emergency Calls Based on Cell of Origin
Is it possible to route emergency calls based on the Cell of origin? In a private network, there is one subscriber who wants all emergency calls originating in one specific area to be routed to a special emergency desk. All other emergency calls within the network would be routed to a different desk.

Answer Question   |  August 10, 2009  11:24 AM
Call Centers, Cisco switches, Networking, Nortel, Switches, Tech support, Telecom, VPN, Wireless

Convert RJ45 connection to wireless.
I have a pressure test rig that uses an RJ-45 jack to connect to our network. When the test rig was originally set up, it was stationary. We have changed our production method and now the rig is on wheels is used in 4 separate locations, thus I need a network cable at each of [...]

Answer Question   |  March 10, 2009  2:54 PM
Ethernet adapters, RJ45, WAPS, Wireless, Wireless networking

Wireless Synchronization with a blackberry and Domino server on Linux
Is there any solution for wireless synchronization of mail/calendar between a Domino server running on the linux platform, and a blackberry device? From my research it appears that BES will only run on a windows server. I’ve tried IMAP for at least the mail portion, but find it only works like POP, and it’s buggy. [...]

Answer Question   |  February 11, 2009  5:55 PM
BlackBerry, BlackBerry Lotus Notes, IMAP, Lotus Domino, Lotus Notes, POP, Synchronization, Wireless

PC5250 License Error return code 9052 2751
We added NetMotion to our network and have it acting as a type of “fire wall”. Laptops running iSeries Access for Windows (v5r3) are getting this error periodically – around every 30 days. Much older versions of CAE do not present this error. We have found that by taking the user out of their highly [...]

Answer Question   |  October 28, 2008  9:31 PM
9052 2752, AS/400, Client Access, CWB0999, iSeries, License error, NetMotion, unexpected error, Wireless

Limited or no connectivity error message
hi,i have a user who used wireless and lan cable in office . when she unpluged the lan cable , it will auto detect the wireless. But when she plug in the lan cable again the above error message appear for the lan connection. User has to disconnect the wireless manually everytime and click on [...]

Answer Question   |  September 20, 2008  8:56 AM
LAN, Network connectivity, Wireless

Changing Duplex on a POE Cisco 1231 WAP
On a network I am working on I have a Cisco 1231 WAP that is powered via POE. The Duplex is currently set as “Half”, while the rest of the WIFI network (3 more 1230 series WAPs) is set as “Full”. This is causing the device to throw an error once per second. All the [...]

Answer Question   |  September 15, 2008  1:50 PM
Cisco 1231, Networking hardware, PoE, Power over Ethernet, WAP, Wireless

To connect to a wireless network?
I am trying to connect to my company’s wi fi network. Is it neccessary to know the SSID name and the WEP Or WPA key? Also can we try sniffers like aircap to gather and capture the required credentials. Do tools like these capture the SSID name and the encryption key also?

Answer Question   |  September 10, 2008  9:09 AM
SSID, WEP, Wi-Fi, Wireless, Wireless access, Wireless networks, Wireless security, WPA

Need help with wireless connection between two buildings
What is considered the best way to connect two buildings wirelessly? The buildings are about 180′ apart with a two-way road between them. Thanks.

Answer Question   |  August 1, 2008  5:20 PM
Network design, Wireless, Wireless networking