• Wireless Device Access

    I have COMCAST High Speed Internet. The first device connected to it is a Vonage Motorola Voice Hub, and then a Linksys Wireless DSL/Cable Hub. Is there a way for me to access my wireless TIVO devices across the Internet since their new addresses on the Linksys are default 192.168.1.*?

    Itsquire5 pointsBadges:
  • Dos attack

    I have been receiving security alert messages from our firewall nearly everyday. e.g TCP Packet - Source:144.120.8.89,39341 Destination:192.168.1.1,25 - [DOS] TCP Packet - Source:210.7.0.36,3473 Destination:210.7.12.23,135 - [DOS] Thu, 2006-10-19 16:30:03 - UDP Packet -...

    92220990 pointsBadges:
  • Cisco Wireless 1200 DHCP Issues

    Ok, I have seen this same issue on several message boards etc. but I have yet to find a good answer so here it goes. I have a network with 12 Cisco 1200 series access points all connecting to 3550PWR switches. The switches are configured with 2 vlans, one for a public wireless LAN and the other as...

    Leeth70 pointsBadges:
  • Wireless PCMCI lancard Driver Required

    Hi Pls help me to find My ( Dlink Air Plus Xtreme G 2.4ghz High Speed Wireless Cardbus Adaptor DWL-G650 Driver ) i try it to download on Dlink website But it not work pls help me to find driver or is any one have pls share it thanx

    Danial370 pointsBadges:
  • Wireless Synchronization with a blackberry and Domino server on Linux

    Is there any solution for wireless synchronization of mail/calendar between a Domino server running on the linux platform, and a blackberry device? From my research it appears that BES will only run on a windows server. I've tried IMAP for at least the mail portion, but find it only works like POP,...

    LinuxDomino5 pointsBadges:
  • Who is responsible for the Firewall

    Our information Security department is different from the network group. Currently, we have Check Point firewalls running on Nokia boxes (IPSO image). The Network group handles the installation, upgrade, routing and IP address specification etc on the firewalls, while Information Security writes...

    Muneanya0 pointsBadges:
  • Wireless cloud without an Ethernet backbone required

    I?m trying to connect the registration terminals used outside various halls at any given exhibition centre to a completely independent network that my company will set up at whatever site we attend. Most of our work is in the Middle East, so taking the Dubai World Trade Centre as a prime example,...

    UrbanPeasant0 pointsBadges:
  • Intrussion detection

    Does any one know of any goof Intrussion detection system boxes which are not crazy expensive and support up to 1GB lines.

    Dimchik0 pointsBadges:
  • Wireless bridge

    My office runs a normal LAN. The company has recently purchased the building next door, and we want to extend the LAN into this building using a wireless link. To achieve this, we have purchased 2 Netgear WPN802 wireless access points. The Netgear website has a step by step guide to configuring the...

    Nickc197665 pointsBadges:
  • PC5250 License Error return code 9052 2751

    We added NetMotion to our network and have it acting as a type of "fire wall". Laptops running iSeries Access for Windows (v5r3) are getting this error periodically - around every 30 days. Much older versions of CAE do not present this error. We have found that by taking the user out of their...

    DPerry35 pointsBadges:
  • Monitoring the Network

    Hi, I have multiple remote sites. I would like to monitor the network and analyze the traffic and its performance in general. For example, how the bandwidth is consumed, if certain activities are unnecessary and how to improve the networks performance by blocking through the firewall like...

    Maryam82100 pointsBadges:
  • Penetration Testing.

    Hi!! Good Morning. I have a simple question for you today. I intend to have a penetration testing done for all of my 3 sites - My US Office, My India Office & My US Datacenter. Can you suggest any trustworthy site which can offer me a free reliable scan? Also, I would like to have you suggestion on...

    Nileshroy0 pointsBadges:
  • Wireless Controller 4404

    I currently have WLC 4124 and I'm in a process of testing new controller 4404. My problem is that I want to test only two APs from the existing on the new controller and not sure how to make them discovered on the new after disabling them on the current. The other issue - is there any risk of...

    Fmubarek15 pointsBadges:
  • wireless vlan

    hi all, is it possible to have one link from a switch to an access point and split the network into two networks a wireless network from the AP and a wired port for a user connected thru RJ45 and still keep it secured.

    92220990 pointsBadges:
  • WAP Interferes with Network Switches

    Recently I got a new PoE outdoor wireless access point. When attempting to configure the device in my office for the first time, everything seemed ok. When I deployed the unit inside the building to test it, I noticed several network switches including the one it was connected to acting up and...

    Schmidtw11,330 pointsBadges:
  • Limited or no connectivity error message

    hi,i have a user who used wireless and lan cable in office . when she unpluged the lan cable , it will auto detect the wireless. But when she plug in the lan cable again the above error message appear for the lan connection. User has to disconnect the wireless manually everytime and click on repair...

    Sirong210 pointsBadges:
  • Changing Duplex on a POE Cisco 1231 WAP

    On a network I am working on I have a Cisco 1231 WAP that is powered via POE. The Duplex is currently set as "Half", while the rest of the WIFI network (3 more 1230 series WAPs) is set as "Full". This is causing the device to throw an error once per second. All the WAPS, including the half duplex...

    Flame14,925 pointsBadges:
  • To connect to a wireless network?

    I am trying to connect to my company's wi fi network. Is it neccessary to know the SSID name and the WEP Or WPA key? Also can we try sniffers like aircap to gather and capture the required credentials. Do tools like these capture the SSID name and the encryption key also?

    Rahul Shrivastava330 pointsBadges:
  • Wireless Camera Network Hopping

    Recently I installed a wireless network camera in a plant elevator. I am getting a relatively good signal but it jumps ever so often and reduces frame rate to about 1/5th of what it should be. The wireless network in the building spans 8 floors and is a single SSID being broadcasted. The make up of...

    Schmidtw11,330 pointsBadges:
  • Need help with wireless connection between two buildings

    What is considered the best way to connect two buildings wirelessly? The buildings are about 180' apart with a two-way road between them. Thanks.

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following