Recent IT Questions

1 - 20 of 352
<<PREVIOUS 1|2|3|4|5|6|7|8|9|10 NEXT>>

Wireless network lease span

Hi, what happens when the lease for my wireless network expires how do I set the lease time span for my wireless network? Can I set it to infinite? I am using a TP-Link TL-WR542G wireless router. Thanx.

View Answer   |  Jun 29 2009  5:04 PM GMT
DHCP Lease Renewal, DHP, Wireless
asked by Arifdelavega

  5 pts.

Cisco Wireless 1200 DHCP Issues

Ok, I have seen this same issue on several message boards etc. but I have yet to find a good answer so here it goes. I have a network with 12 Cisco 1200 series access points all connecting to 3550PWR switches. The switches are configured with 2 vlans, one for a public wireless LAN and the other...

View Answer   |  Jun 29 2009  3:20 PM GMT
Wireless, Cisco, DHCP
asked by Leeth

  20 pts.

Wireless PCMCI lancard Driver Required

Hi Pls help me to find My ( Dlink Air Plus Xtreme G 2.4ghz High Speed Wireless Cardbus Adaptor DWL-G650 Driver ) i try it to download on Dlink website But it not work pls help me to find driver or is any one have pls share it thanx

View Answer   |  Jun 24 2009  6:23 AM GMT
wireless PCMCI lancard, Drivers, Wireless
asked by Danial

  80 pts.

Email: PC to laptop via wireless.

I have cable internet to home PC and wireless from cable to laptop. Laptop does not receive all the same messages as the PC. Why????

View Answer   |  May 2 2009  2:25 AM GMT
Email, Wireless, PC
asked by MNDave

  25 pts.

Routing Public Emergency Calls Based on Cell of Origin

Is it possible to route emergency calls based on the Cell of origin? In a private network, there is one subscriber who wants all emergency calls originating in one specific area to be routed to a special emergency desk. All other emergency calls within the network would be routed to a different...

Answer Question   |  Mar 13 2009  11:24 AM GMT
Call Centers, Cisco switches, Nortel
asked by Amawhinn

  15 pts.

Convert RJ45 connection to wireless.

I have a pressure test rig that uses an RJ-45 jack to connect to our network. When the test rig was originally set up, it was stationary. We have changed our production method and now the rig is on wheels is used in 4 separate locations, thus I need a network cable at each of these locations, I...

View Answer   |  Feb 20 2009  2:54 PM GMT
Wireless, Ethernet adapters, WAPS
asked by Flame

  14495 pts.

Wireless Synchronization with a blackberry and Domino server on Linux

Is there any solution for wireless synchronization of mail/calendar between a Domino server running on the linux platform, and a blackberry device? From my research it appears that BES will only run on a windows server. I've tried IMAP for at least the mail portion, but find it only works like...

View Answer   |  Feb 3 2009  5:55 PM GMT
BlackBerry, Lotus Domino, Lotus Notes
asked by LinuxDomino

  5 pts.

PC5250 License Error return code 9052 2751

We added NetMotion to our network and have it acting as a type of "fire wall". Laptops running iSeries Access for Windows (v5r3) are getting this error periodically - around every 30 days. Much older versions of CAE do not present this error. We have found that by taking the user out of their ...

View Answer   |  Oct 24 2008  9:31 PM GMT
Wireless, AS/400, iSeries
asked by DPerry

  35 pts.

Limited or no connectivity error message

hi,i have a user who used wireless and lan cable in office . when she unpluged the lan cable , it will auto detect the wireless. But when she plug in the lan cable again the above error message appear for the lan connection. User has to disconnect the wireless manually everytime and click on repair...

View Answer   |  Sep 19 2008  8:56 AM GMT
Wireless, Network connectivity, LAN
asked by Sirong

  210 pts.

Changing Duplex on a POE Cisco 1231 WAP

On a network I am working on I have a Cisco 1231 WAP that is powered via POE. The Duplex is currently set as "Half", while the rest of the WIFI network (3 more 1230 series WAPs) is set as "Full". This is causing the device to throw an error once per second. All the WAPS, including the half duplex...

View Answer   |  Sep 10 2008  1:50 PM GMT
Wireless, WAP, Networking hardware
asked by Flame

  14495 pts.

To connect to a wireless network?

I am trying to connect to my company's wi fi network. Is it neccessary to know the SSID name and the WEP Or WPA key? Also can we try sniffers like aircap to gather and capture the required credentials. Do tools like these capture the SSID name and the encryption key also?

View Answer   |  Sep 10 2008  9:09 AM GMT
Wireless, WEP, WPA
asked by Rahul Shrivastava

  275 pts.

Need help with wireless connection between two buildings

What is considered the best way to connect two buildings wirelessly? The buildings are about 180' apart with a two-way road between them. Thanks.

View Answer   |  Jul 31 2008  5:20 PM GMT
Wireless, Wireless networking, Network design
asked by NetworkingATE

  1095 pts.

wireless software on fresh XP install

I had to wipe the hard drive on my laptop clean and reinstall XP. How do I get my laptop to connect to my linksys router again? I tried to connect to the internet with the ethernet cable from my home PC to maybe download wireless software, but was still unable to connect...what can I do?

View Answer   |  Jul 31 2008  3:26 AM GMT
Wireless, Linksys, Wireless networking
asked by Cessna384

  75 pts.

Wireless software trouble

I had to completely reinstall my XP Pro OS due to problems with dual booting Linux....anyways, how can i get Intel Pro/Wireless back on my laptop without being able to access the internet to download it? I tried plugging the Ethernet cable from my home PC into it but it still wont let me connect....

View Answer   |  Jul 30 2008  3:41 PM GMT
Wireless, Windows XP, Wireless software
asked by Cessna384

  75 pts.

Ubuntu inspiron with laptop

I have ubuntu 8 and need to know how to get inspiron 6400 laptop working wireless. I need a simple step-by-step procedure - I am new to linux. Thanks!

View Answer   |  Jul 28 2008  7:25 PM GMT
Wireless, Network connectivity, Ubuntu Linux
asked by Chunter

  110 pts.

Windows XP Bridge Connections

i have a desktop, a laptop and a wireless signal can someone plz give me step-by-step instructions for setting up a network bridge to connect my ethernet connection between my laptop and the desktop to the wireless signal being recieved by my laptop do all 3 ipaddresses have to be static, the...

View Answer   |  Jul 17 2008  6:02 PM GMT
Wireless, Windows XP, Bridges
asked by Itguy1509

  220 pts.

Wireless Camera Network Hopping

Recently I installed a wireless network camera in a plant elevator. I am getting a relatively good signal but it jumps ever so often and reduces frame rate to about 1/5th of what it should be. The wireless network in the building spans 8 floors and is a single SSID being broadcasted. The make up...

View Answer   |  Jul 15 2008  8:53 PM GMT
Wireless, WAP, Spanning Tree Protocol
asked by Schmidtw

  9790 pts.

WAP Interferes with Network Switches

Recently I got a new PoE outdoor wireless access point. When attempting to configure the device in my office for the first time, everything seemed ok. When I deployed the unit inside the building to test it, I noticed several network switches including the one it was connected to acting up and...

View Answer   |  Jul 15 2008  1:25 PM GMT
Wireless, Switches, WAP
asked by Schmidtw

  9790 pts.

What are the wireless standards?

What are the wireless standards?

View Answer   |  Jul 14 2008  10:42 PM GMT
Wireless, Wireless standards
asked by Rubben021624

  5 pts.

Wireless Connection

My friend has a Compaq nc4000 that she purchased from the IT Department at her lawfirm. Everything on the laptop works great except that it does not detect wireless access points. Tried refreshing, reinstalling drivers from HP and ensured the hardware was detected. It shows as if was working...

View Answer   |  Jun 20 2008  1:22 AM GMT
Wireless, Network connectivity, HP Compaq nc4000
asked by Littlejuanito7

  200 pts.


1 - 20 of 352
<<PREVIOUS 1|2|3|4|5|6|7|8|9|10 NEXT>>