• Laptop cannot detect home WLAN server

    I have two T42 laptops which connect to a Siemens Gigaset Wlan server. One has been used by my son at boarding school and the settings have probably been changed. It now does not see the home Wlan server any more, even so it still sees weaker servers in surrounding houses. The second T42 sees and...

    Wlannovice15 pointsBadges:
  • Problem in Linksys Wireless G ADSL Home Gateway

    Hi, I am using Linkys modem (model : annex -A) i am configure the modem using rechargable card,encapsulation is RFC 2516 pppoE,multiplexing is LLC,qos type is UBR,autodetect is Enabled,Dsl modulation is ADSL2+, vpi/vci is 0.35, after save changes i see the stsatus interface is up, but i try to...

    Elite20 pointsBadges:
  • Can I use a Linksys BEFSR41 as a hub connected to a Linksys WRT150N?

    I have replaced my BEFSR41 VER 3 with a WRT150N. Can I use the BEFSR41 as a hub connected to the 150N?

    Grntech5 pointsBadges:
  • Need help with small wireless network

    if i have a wireless N router and i want to hook up a desktop at the other end of the house up with a network adapter do i need an N adapter or can i use a G?

    Raremold201010 pointsBadges:
  • removing a router

    We had Linksys router wrt54g and it was having some problems. We go a wrt54g2 to replace it. I loaded the software, but the old router, which is no longer attached, still shows up on the network. I can't find anyway to remove it. The network seems to see it as the router, whereas the router we are...

    LB5 pointsBadges:
  • wireless routers

    I have just moved into an apartment in NY. I have an iMac G5 and a work laptop running Vista. I want to set up a wireless network and am considering routers. As the imac is some distance from the modem I will need an antennae of some description. Any suggestions?

    SKC5 pointsBadges:
  • Trouble configuring two Cisco 1310 for building-to-building Wi-Fi

    I tried to connect 2 Cisco 1310 for a building to building connection via Wi-Fi. I used the following sample configs found in this tip, called Configure Cisco wireless bridges for point-to-point networking. One the Cisco 1310 Access Points/Bridges starts up and the connection stays up for a few...

    NetworkingATE1,545 pointsBadges:
  • having a drop in wireless connection

    I have a wireless network setup with a Linksys 160 now, it was on a netgear. i change wireless routers because i thought that it was the router that was the problem, but it isnt. My computer and a PS3 are both hardwired to the router, my parents computer and laptop and my PSP are wireless....

    Shady9015 pointsBadges:
  • I’m using wireless netgear router and i can’t share printer.

    I'm using wireless netgear router and i can't share printer....please help how do i do that.thx

    Xxx385 pointsBadges:
  • Wireless Router

    We have a Linksys Wireless-N Router. Is it possible for a Wireless Router to run or detect a computer with a wi-fi USB LAN, if the router has no computers connected to it via Ethernet cable? If possible, How?

    ChoosenKing25 pointsBadges:
  • Windows networking: how to display access points and other computers on the network

    I have a wireless LAN at home but am confused about how to display access points and other computers on the network. I use an iMAC, a PC with XP, and a Netgear wireless router. I don't use any wired connections. What/how should I be able to see of this network from the XP machine? Why does Windows...

    NetworkingATE1,545 pointsBadges:
  • wireless setup

    details: linksys wireless hub with which my HPlaser jet 5m with a HPjetdirect card is plugged into. we also have an at&t wireless router. id like to marry the two, router and hub, so users can print while connected to the internet. also, my wife logs into her work via a vpn account using the at&t...

    Houtechsupp5 pointsBadges:
  • 2 Routers on the same Network

    Hi I'm connecting two linksys wireless G routers on the same network. but of course that's crashing my network. What is the best way to configure router one which is getting the internet line and I want router 2 to get internet from router 1. I'm trying to use router two as a repeater of router 1....

    OMAR50 pointsBadges:
  • How to connect to my PC using Netmeeting without connecting to other PC’s within my LAN

    I will explain the situation before I post my question. I have broadband connection and a wireless router. My IP is static and it's the same if I connect from any computer within my network when I go to www.whatismyip.com . My question: how can someone connect to my PC using Netmeeting for instance...

    NetworkingATE1,545 pointsBadges:
  • Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.

    SAPFAQ1 197535 pointsBadges:
  • D-Link Wireless Router and wireless access point problem

    I have a D-Link DI-524 Wireless router set up in the office downstairs, this is connected by CAT5 cable to a D-Link DWL-G700AP access point upstairs (as the wireless signal from the office did not reach between floors). There is also a printer connected to the office router to enable printing from...

    Mrssmith0 pointsBadges:
  • Increasing distance coverage

    The following question was submitted to SearchNetworking.com editors. Can you help? How much distance coverage can be increased if I use a 5dbi antenna instead of a 2dpi antenna attached to our D-link dwl-2000ap+ wireless router? How about 12dbi compared to 2 dbi? SaturnS...

  • wireless access points DHCP and drive mapping

    Hello all, I recently installed wireless access points in my organization. They are configured to set automatically via DHCP on a 2000 server machine. It seems to work fine. But when I map a drive on client laptops running XP Pro and set it to reconnect at logon the drive either mysteriously...

    Zzegri0 pointsBadges:
  • Wireless Networks Interfering with Unix Servers

    I have a customer who has a Unix Server running UnixWare 7.1.3. He bought a 3Com wireless access point from a catalogue, but when he switched it on the Unix Server would reboot. This only happened twice before the unit was thrown at me to fins solution. He has in the offices an access point from...

    Mozza10 pointsBadges:
  • Best RF Signal Strength – copy of reply to laurelton of Verizon

    With 30 years of experience in the RF industry and having an FCC commercial license for many years and BTW, I was the Equipment Engineering Manager, NYNEX Mobile in Pearl River at Blue Hill Plaza in the old days ( 1985 - 1989 ), I can offer a few simple suggestions: If the wireless router has the...

    Rudolph0 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following