removing a router
We had Linksys router wrt54g and it was having some problems. We go a wrt54g2 to replace it. I loaded the software, but the old router, which is no longer attached, still shows up on the network. I can’t find anyway to remove it. The network seems to see it as the router, whereas the [...]
Answer Question
| September 24, 2008 4:08 PM
Routers, Vista, Wireless routers, WRT54G, WRT54G2
We had Linksys router wrt54g and it was having some problems. We go a wrt54g2 to replace it. I loaded the software, but the old router, which is no longer attached, still shows up on the network. I can’t find anyway to remove it. The network seems to see it as the router, whereas the [...]
Answer Question
| September 24, 2008 4:08 PM
Routers, Vista, Wireless routers, WRT54G, WRT54G2
wireless routers
I have just moved into an apartment in NY. I have an iMac G5 and a work laptop running Vista. I want to set up a wireless network and am considering routers. As the imac is some distance from the modem I will need an antennae of some description. Any suggestions?
Answer Question
| September 8, 2008 10:42 AM
Network connectivity, Routers, Wireless routers
I have just moved into an apartment in NY. I have an iMac G5 and a work laptop running Vista. I want to set up a wireless network and am considering routers. As the imac is some distance from the modem I will need an antennae of some description. Any suggestions?
Answer Question
| September 8, 2008 10:42 AM
Network connectivity, Routers, Wireless routers
Trouble configuring two Cisco 1310 for building-to-building Wi-Fi
I tried to connect 2 Cisco 1310 for a building to building connection via Wi-Fi. I used the following sample configs found in this tip, called Configure Cisco wireless bridges for point-to-point networking. One the Cisco 1310 Access Points/Bridges starts up and the connection stays up for a few seconds but then it drops. Any [...]
Answer Question
| August 5, 2008 7:02 PM
Access Points, Cisco 1310, Routers, Wi-Fi, Wireless networking, Wireless routers
I tried to connect 2 Cisco 1310 for a building to building connection via Wi-Fi. I used the following sample configs found in this tip, called Configure Cisco wireless bridges for point-to-point networking. One the Cisco 1310 Access Points/Bridges starts up and the connection stays up for a few seconds but then it drops. Any [...]
Answer Question
| August 5, 2008 7:02 PM
Access Points, Cisco 1310, Routers, Wi-Fi, Wireless networking, Wireless routers
How to boost the signal on a Netgear Wireless-N router?
I have installed a Netgear Wireless-N router in my church and it works fine for the laptop computer across the hall. However, the computer 100-200 feet away cannot access the Internet. How can I boost the wireless signal so that the computer down the hall can connect?
Answer Question
| June 20, 2009 6:51 PM
802.11n, Netgear, Routers, Wireless networking, Wireless routers
I have installed a Netgear Wireless-N router in my church and it works fine for the laptop computer across the hall. However, the computer 100-200 feet away cannot access the Internet. How can I boost the wireless signal so that the computer down the hall can connect?
Answer Question
| June 20, 2009 6:51 PM
802.11n, Netgear, Routers, Wireless networking, Wireless routers
Configuring Cisco Wireless Router
Greetings, I have a Cisco 871 wireless router and am having problems configuring it to act as a Wireless Access Point for my small internal network using Microsoft Small Business Server 2003. I am trying to set up one client access via wireless. Using Cisco’s SDM Express, when trying to change the LAN Interface IP [...]
Answer Question
| May 8, 2013 9:50 PM
Access Points, Cisco, Cisco 871, Cisco SDM, Router configuration, Routers, SBS, Security Device Manager, Wireless routers
Greetings, I have a Cisco 871 wireless router and am having problems configuring it to act as a Wireless Access Point for my small internal network using Microsoft Small Business Server 2003. I am trying to set up one client access via wireless. Using Cisco’s SDM Express, when trying to change the LAN Interface IP [...]
Answer Question
| May 8, 2013 9:50 PM
Access Points, Cisco, Cisco 871, Cisco SDM, Router configuration, Routers, SBS, Security Device Manager, Wireless routers
Connectivity problem HP Presario V4000
I can’t get an internet connection. We have comcast cable service and a Cisco wireless router. When I try to open MS internet explorer it says I can’t connect to server. On connectivity it says I have “limited or no wireless connection” I tried a direct connection to the comcast modem and it still doesn’t [...]
Answer Question
| July 15, 2008 6:39 PM
Cisco, HP Presario V4000, Network connectivity, Routers, Wireless routers
I can’t get an internet connection. We have comcast cable service and a Cisco wireless router. When I try to open MS internet explorer it says I can’t connect to server. On connectivity it says I have “limited or no wireless connection” I tried a direct connection to the comcast modem and it still doesn’t [...]
Answer Question
| July 15, 2008 6:39 PM
Cisco, HP Presario V4000, Network connectivity, Routers, Wireless routers
having a drop in wireless connection
I have a wireless network setup with a Linksys 160 now, it was on a netgear. i change wireless routers because i thought that it was the router that was the problem, but it isnt. My computer and a PS3 are both hardwired to the router, my parents computer and laptop and my PSP are [...]
Answer Question
| July 7, 2008 4:10 PM
Linksys, Routers, Wireless Access Points, Wireless routers
I have a wireless network setup with a Linksys 160 now, it was on a netgear. i change wireless routers because i thought that it was the router that was the problem, but it isnt. My computer and a PS3 are both hardwired to the router, my parents computer and laptop and my PSP are [...]
Answer Question
| July 7, 2008 4:10 PM
Linksys, Routers, Wireless Access Points, Wireless routers
upgrade cisco aironet access point 1130 from autonomous to lightweight
please how to upgrade cisco aironet access point 1130 from autonomous to lightweight , how can i do this step by step
Answer Question
| July 9, 2008 12:06 PM
Access Points, Cisco, Cisco Aironet, Routers, Wireless routers
please how to upgrade cisco aironet access point 1130 from autonomous to lightweight , how can i do this step by step
Answer Question
| July 9, 2008 12:06 PM
Access Points, Cisco, Cisco Aironet, Routers, Wireless routers
I’m using wireless netgear router and i can’t share printer.
I’m using wireless netgear router and i can’t share printer….please help how do i do that.thx
Answer Question
| June 24, 2008 8:22 AM
Netgear, Routers, Shared printers, Wireless networking, Wireless routers
I’m using wireless netgear router and i can’t share printer….please help how do i do that.thx
Answer Question
| June 24, 2008 8:22 AM
Netgear, Routers, Shared printers, Wireless networking, Wireless routers
Need a stable wireless router – what one to get
I currently have a D-Link WBR-2310 serving as the outside router for my network, and it likes to reboot irregularly. Sometimes it reboots a couple times a day, causing disruptions for our users who complain mightily. I’ve updated firmware to the latest (v1.05) and it continues to reboot unexpectedly. This is my outside router that [...]
Answer Question
| February 9, 2011 8:40 PM
D-Link, Firewalls, Routers, Wireless, Wireless routers
I currently have a D-Link WBR-2310 serving as the outside router for my network, and it likes to reboot irregularly. Sometimes it reboots a couple times a day, causing disruptions for our users who complain mightily. I’ve updated firmware to the latest (v1.05) and it continues to reboot unexpectedly. This is my outside router that [...]
Answer Question
| February 9, 2011 8:40 PM
D-Link, Firewalls, Routers, Wireless, Wireless routers
Wifi/client-bridge/subnets???
Ive got the basics on home networking down pretty well but when it comes to subnets, I get lost. Here’s the scenario… WWW–> router 1–>gateway 192.168.1.1/255.255.255.0, wireless G AP, set to auto dhcp, max 50 clients, and has 2-3 hosts (2 cat5, 1 wifi) set to auto config dhcp. Lets call this side A router [...]
Answer Question
| August 5, 2011 3:52 AM
Home networks, Subnets, Wi-Fi, Wireless networking, Wireless routers
Ive got the basics on home networking down pretty well but when it comes to subnets, I get lost. Here’s the scenario… WWW–> router 1–>gateway 192.168.1.1/255.255.255.0, wireless G AP, set to auto dhcp, max 50 clients, and has 2-3 hosts (2 cat5, 1 wifi) set to auto config dhcp. Lets call this side A router [...]
Answer Question
| August 5, 2011 3:52 AM
Home networks, Subnets, Wi-Fi, Wireless networking, Wireless routers
Wireless Router
We have a Linksys Wireless-N Router. Is it possible for a Wireless Router to run or detect a computer with a wi-fi USB LAN, if the router has no computers connected to it via Ethernet cable? If possible, How?
Answer Question
| April 25, 2008 7:46 AM
802.11n, Linksys, Networking, Routers, Wireless networking, Wireless routers
We have a Linksys Wireless-N Router. Is it possible for a Wireless Router to run or detect a computer with a wi-fi USB LAN, if the router has no computers connected to it via Ethernet cable? If possible, How?
Answer Question
| April 25, 2008 7:46 AM
802.11n, Linksys, Networking, Routers, Wireless networking, Wireless routers
Windows networking: how to display access points and other computers on the network
I have a wireless LAN at home but am confused about how to display access points and other computers on the network. I use an iMAC, a PC with XP, and a Netgear wireless router. I don’t use any wired connections. What/how should I be able to see of this network from the XP machine? [...]
Answer Question
| April 18, 2008 5:19 PM
Access Points, Displays, iMac, Netgear, Network, Networking, PC, Routers, Windows networking, Windows XP, Wireless, Wireless LAN, Wireless routers, WLAN
I have a wireless LAN at home but am confused about how to display access points and other computers on the network. I use an iMAC, a PC with XP, and a Netgear wireless router. I don’t use any wired connections. What/how should I be able to see of this network from the XP machine? [...]
Answer Question
| April 18, 2008 5:19 PM
Access Points, Displays, iMac, Netgear, Network, Networking, PC, Routers, Windows networking, Windows XP, Wireless, Wireless LAN, Wireless routers, WLAN
wireless setup
details: linksys wireless hub with which my HPlaser jet 5m with a HPjetdirect card is plugged into. we also have an at&t wireless router. id like to marry the two, router and hub, so users can print while connected to the internet. also, my wife logs into her work via a vpn account using the [...]
Answer Question
| February 13, 2008 3:32 PM
Wireless routers
details: linksys wireless hub with which my HPlaser jet 5m with a HPjetdirect card is plugged into. we also have an at&t wireless router. id like to marry the two, router and hub, so users can print while connected to the internet. also, my wife logs into her work via a vpn account using the [...]
Answer Question
| February 13, 2008 3:32 PM
Wireless routers
2 Routers on the same Network
Hi I’m connecting two linksys wireless G routers on the same network. but of course that’s crashing my network. What is the best way to configure router one which is getting the internet line and I want router 2 to get internet from router 1. I’m trying to use router two as a repeater of [...]
Answer Question
| February 11, 2008 3:51 PM
Network, Routers, Wireless routers
Hi I’m connecting two linksys wireless G routers on the same network. but of course that’s crashing my network. What is the best way to configure router one which is getting the internet line and I want router 2 to get internet from router 1. I’m trying to use router two as a repeater of [...]
Answer Question
| February 11, 2008 3:51 PM
Network, Routers, Wireless routers
Wireless Router
I have a Linksys wireless G router connected to a cable modem. In my home I have a desktop computer with a USB Linksys wireless external card connected to it. I also have a Toshiba laptop with an internal wireless card. These both talk to my router and can get to the internet but it [...]
Answer Question
| February 14, 2011 5:36 PM
Routers, Wireless routers
I have a Linksys wireless G router connected to a cable modem. In my home I have a desktop computer with a USB Linksys wireless external card connected to it. I also have a Toshiba laptop with an internal wireless card. These both talk to my router and can get to the internet but it [...]
Answer Question
| February 14, 2011 5:36 PM
Routers, Wireless routers
Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.
Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.
Answer Question
| January 18, 2008 8:28 AM
ADSL modems, Linksys, Routers, Wireless, Wireless routers
Help configuring Linkys wireless router with Paradyne ADSL modem, its fine with modem but with wireless router I cannot access network.
Answer Question
| January 18, 2008 8:28 AM
ADSL modems, Linksys, Routers, Wireless, Wireless routers
How to connect to my PC using Netmeeting without connecting to other PC’s within my LAN
I will explain the situation before I post my question. I have broadband connection and a wireless router. My IP is static and it’s the same if I connect from any computer within my network when I go to www.whatismyip.com . My question: how can someone connect to my PC using Netmeeting for instance and [...]
Answer Question
| January 28, 2008 9:42 PM
IP, LAN, Networking, Wireless routers
I will explain the situation before I post my question. I have broadband connection and a wireless router. My IP is static and it’s the same if I connect from any computer within my network when I go to www.whatismyip.com . My question: how can someone connect to my PC using Netmeeting for instance and [...]
Answer Question
| January 28, 2008 9:42 PM
IP, LAN, Networking, Wireless routers
D-Link Wireless Router and wireless access point problem
I have a D-Link DI-524 Wireless router set up in the office downstairs, this is connected by CAT5 cable to a D-Link DWL-G700AP access point upstairs (as the wireless signal from the office did not reach between floors). There is also a printer connected to the office router to enable printing from any client on [...]
Answer Question
| November 28, 2007 4:52 AM
Routers, Wireless, Wireless Access Points, Wireless routers
I have a D-Link DI-524 Wireless router set up in the office downstairs, this is connected by CAT5 cable to a D-Link DWL-G700AP access point upstairs (as the wireless signal from the office did not reach between floors). There is also a printer connected to the office router to enable printing from any client on [...]
Answer Question
| November 28, 2007 4:52 AM
Routers, Wireless, Wireless Access Points, Wireless routers
connecting the 5th and 7th floosr of a building
Hi, Everybody My network covers the 5 th floor of an office building, and now we expanding to the 7th floor (a half-dozen users. All the servers and telecom closet are on the 5th floor and I have to provide network services to the users on the 7th floor. I would like to have the [...]
Answer Question
| May 24, 2012 2:25 AM
802.11 networking equipment, Cabling, Data center operations, DataCenter, DataManagement, Desktop security, Desktops, DHCP, DNS, Gigabit ethernet, Hardware, Help Desk, Hubs, Information risk management, Networking, Networking Equipment, Networking services, Novell NDS, Routers, Security, Security management, Security products, Servers, Software Quality Assurance, Switches, Tech support, WAP, WEP, Wi-Fi Protected Access, Windows client administration and maintenance, Wired Equivalency Privacy, Wireless, Wireless Application Protocol, Wireless PC cards, Wireless routers, Wireless standards, WPA
Hi, Everybody My network covers the 5 th floor of an office building, and now we expanding to the 7th floor (a half-dozen users. All the servers and telecom closet are on the 5th floor and I have to provide network services to the users on the 7th floor. I would like to have the [...]
Answer Question
| May 24, 2012 2:25 AM
802.11 networking equipment, Cabling, Data center operations, DataCenter, DataManagement, Desktop security, Desktops, DHCP, DNS, Gigabit ethernet, Hardware, Help Desk, Hubs, Information risk management, Networking, Networking Equipment, Networking services, Novell NDS, Routers, Security, Security management, Security products, Servers, Software Quality Assurance, Switches, Tech support, WAP, WEP, Wi-Fi Protected Access, Windows client administration and maintenance, Wired Equivalency Privacy, Wireless, Wireless Application Protocol, Wireless PC cards, Wireless routers, Wireless standards, WPA
