• wireless network extention

    Linksys N wireless router, have 54g/B range extender, still have one bad spot...use another router, another range extender or a wireless access point

    Cherrioman25 pointsBadges:
  • Logical wireless extension to my corporate network running Cisco equipment?

    What is the logical wireless extension to my corporate network running all cisco equipment? We need to extend an outdoor portion of the network and want it to integrate with the rest of the network seamlessly.

    Troubleshooter24755 pointsBadges:
  • SonicWALL Sonicpoint-N 11A/B/G Dual-Band bundled with Poe injector

    what brand is comparable to this exact model or hopefully much better

    Srigoroso35 pointsBadges:
  • Psion Teklogix connectivity

    We have a Psion Teklogix Wifi installed in our warehouse. It consists of a 9150 controller and several 9150T Access Points, each with two antennas. We use Tess 5250 emulator on the 7535 handheld. The problem is that we very seldom can log in to the iSeries from the handheld. It works maybe 5% of...

    STCA60 pointsBadges:
  • Station with a mac address 00:11:22:33:44:55 shown on wireless clients

    station with a mac address 00:11:22:33:44:55 shown on wireless clients: Multiple Clients have same Mac address 00:11:22:33:44:55 I guessed it might be an issue from some of the NIC manufacturers.I am wondering what is the impact to the users on the wireless network will be? If two users have the...

    Truth5 pointsBadges:
  • Toshiba Laptop (wireless – netgear router) Windows Vista to print to Gateway desk top Windows XP with HP Laser Jet 2100 PCL6

    I have a wireless (netgear) network for my Toshiba Windows Vista laptop and I am trying to print to a Gateway desktop Window XP with a HP Laser Jet 2100 PCL6.  I have turned on the sharing for the desk top and tried to add the driver to the lap top but it said it was incompatible so I browsed the...

    Sweetie15 pointsBadges:
  • Wireless internet connectivity problems on Windows XP machines

    My users can connect with their laptops on our wired connection. When they go on the road and try to connect via wireless in hotels/airports etc the wireless connection connects, gives them a local IP address etc. yet they are unable to get any webpages to load. I've even had them try to use the IP...

    Major8Payne30 pointsBadges:
  • How to configure two default gateways to be 2 ISP (PIX 525)

    I have a network as follows: PIX Firewall 525 uses three network interface Ethernet1, Ethernet2, Ethernet3. E1 (, Inside) connected to LAN E2 (, Outside) connected to the modem ( ISP1 (This address by the ISP level) E3 (, Outside2) connected to the...

    Arowana200015 pointsBadges:
  • Troubleshooting wireless network

    when my Wi-Fi is not working my windows shows me a option for troubleshoot. in that i have seen that troubleshooting actually reset the network adapter.can u pl tel me what actually does that means in technical sense.

    Sonuamit10 pointsBadges:
  • Can 2 dsl units be connected through separate switches and 2 NIC’s work?

    I have a Dell 3G processor and 512k mem, using windows 2003 server and two NIC's one 24ch sw for all clients, one dsl for internet connection. Question: can 2 dsl units be connected thru seperate switches and 2 NIC's work?

    Nc951235 pointsBadges:
  • Extending Wi-Fi’s range to pick up signals farther away

    We have a set of dell corporate laptops. Can we extend the wifi’s range on them to be able to pick up signals further away? We are working with Windows Vista and 802.11 G wireless mini pci cards.

    ITKE376,290 pointsBadges:
  • Appropriate configuration for adding a wireless router to a wired network

    What is the appropriate configuration for adding a wireless router to my wired network without affecting the network. This will be for visitors and does not need access to the network other than internet and printing. I would like to separate this out to our dmz. Are there white papers on this?

    TeachMeIT975 pointsBadges:
  • Static webpage to instruct users what to do to gain access to network

    I have seen schools that have informational pages when you connect to their hotspots telling you what you need to do to access it. What can I do to do something similar on my corporate network. Instructing the users to contact the right person by displaying a static webpage.

    Troubleshooter24755 pointsBadges:
  • Organizing traffic with mixed wireless and wired clients

    If I have a mixture of wireless and wired clients connecting to the same devices across my network do I need to separate the traffic into vlans? Will this help network speed? Or is it not necessary?

    NewnanIT1,110 pointsBadges:
  • Answer a Question, Get A Practical Guide to Linux!

    This week's IT book giveaway is A Practical Guide to Linux Commands, Editors, and Shell Programming. Answer one of five unanswered questions then leave a link to your answer in the discussion area below. On Friday, August 20, 2010 at 12 PM ET, we'll choose a winner from those who answer. Ready,...

    MelanieYarbrough6,345 pointsBadges:
  • Connecting two routers on the same network to extend range

    Can I connect 2 wireless routers on the same network to extend the range of the network? What changes will I have to make and what routers would you recommend?

    ITKE376,290 pointsBadges:
  • Results of two wireless clients logging into the same network with the same static IP

    If two wireless clients log on to the same network and both have the same static ip configured for the wireless adapter and they log on at the same time what will happen? Will either be able to use it? Or both intermittently? Is there a way to protect from this? We use static ips around here for...

    ITKE376,290 pointsBadges:
  • Wireless Network Bypassing

    hi i have one wireless Linksys usb network adaptor , i connect it to my Laptop after getting signal internet start normally .know question is that i want to use my laptop as a wireless repeater .( like attach one router to laptop and getting signal in my place) actually in my room there is very...

    Danial370 pointsBadges:
  • Bridging mode on a LinkSys router

    What is bridging mode on a linksys router and how does it differ from using signal extenders. Is this a good way to add routers to remote parts of my network to extend the signal? We have a big mix of OSes and machines connecting to the network and we have points where the signal does dwindle down...

    ITKE376,290 pointsBadges:
  • How can I see what users are connected to my wireless network?

    How can I see what users are connected to my wireless network? I am running a sonicwall tz170 for wireless connectivity. Is there a place I can see which machines are connected? Host name and dynamic IP? Can I export this information as well?

    MelanieYarbrough6,345 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.