• What the option for bridge mode mean in DSL modem?

    What does the option for bridge mode mean in DSL modem?

    TeachMeIT975 pointsBadges:
  • DNS lookup failed with wireless repeater

    so iv had this problem with two wireless repeaters now. when im connected to just the router, i am able to access the internet. however when i plug in and set up the wireless repeater ( the latest one is a amped wireless sr300) it works for a few min and then i get a "DNS lookup failed" when trying...

    Pvsmith25 pointsBadges:
  • Wireless channel architecture

    In your article of designing 802.11n, you state 'Channel architecture: Nearly all products use multiple channels to create micro-cells, but at least two vendors use a single channel to create one big RF layer. The latter clearly cuts roam time when clients move, but trade-offs are hotly debated.'...

    Nogirs15 pointsBadges:
  • DAP-1160 wireless G Access Point problem

    I Have DAP-1160 wireless G access point. Why the STATUS led is not blinking? My pc won't rekognize it. it worked befor reseting, after that the STATUS led does not blink.Not even when it;s connected to the pc. What is the problem? Can this problem be solved? Please help

    DeNashH5 pointsBadges:
  • With both wired and wireless network connection, prefer to go wired, but metric doesn’t always work.

     When a laptop has both wireless and wired connection at the same time, we want to make sure the network traffic is going through the ethernet cable first instead of going via air. A lot of research was telling me that Windows has the preferred route to higher throughput interface. I found this...

    springman95 pointsBadges:
  • Wireless Routers with Static DHCP settings?

    We have an internal wired network that DOESN'T use DHCP. Client machines have their IPs set uniquely & their gateway & DNS settings pointing at a proxy server that gives internet access. I need to add wireless capability to this network. So the access point has to be able to have a hardwired IP,...

    ITKE351,965 pointsBadges:
  • What brand of routers/switches do you trust the most?

    We're wondering what everyone is using for a brand of wireless routers and switches? What do you prefer to use in the enterprise versus at home or in personal networks? What are your suggestions for SMBs to large corporations? We've got 150 knowledge points for our favorite answer!

    MelanieYarbrough6,345 pointsBadges:
  • Disabling wireless internet at specific times

    Is there a method for disabling wireless internet from our routers at a specified time every day? When the offices close the wifi closes as well. We have seen some horrible traffic from late nights presumably from the parking lot.

    Troubleshooter24755 pointsBadges:
  • Using wireless router stand alone

    Once I have configured my wireless router with a network connected desktop, can the  wireless  router be run stand alone and utilized only  with my laptops that are prewired with wireless?  The desktop will be disconnected.

    Geeeceee5 pointsBadges:
  • Assigning wireless encryption

    What methods of assigning wireless encryption codes to our users do we have? I want the process to be automated where they connect to the network and see a web page where they can log in and retrieve their codes. What options do I have?

    TeachMeIT975 pointsBadges:
  • wireless router as hub…

    I use a wireless internet connection in the next office over.  I have a router to connect 3 PCs in my office on a small wired net.  The router also has wireless capability.  Is it possible to use the wireless side of my router to link into the next router over, making mine just a hub and...

    Etfjr5 pointsBadges:
  • wireless network extention

    Linksys N wireless router, have 54g/B range extender, still have one bad spot...use another router, another range extender or a wireless access point

    Cherrioman25 pointsBadges:
  • Logical wireless extension to my corporate network running Cisco equipment?

    What is the logical wireless extension to my corporate network running all cisco equipment? We need to extend an outdoor portion of the network and want it to integrate with the rest of the network seamlessly.

    Troubleshooter24755 pointsBadges:
  • SonicWALL Sonicpoint-N 11A/B/G Dual-Band bundled with Poe injector

    what brand is comparable to this exact model or hopefully much better

    Srigoroso35 pointsBadges:
  • Psion Teklogix connectivity

    We have a Psion Teklogix Wifi installed in our warehouse. It consists of a 9150 controller and several 9150T Access Points, each with two antennas. We use Tess 5250 emulator on the 7535 handheld. The problem is that we very seldom can log in to the iSeries from the handheld. It works maybe 5% of...

    STCA60 pointsBadges:
  • Station with a mac address 00:11:22:33:44:55 shown on wireless clients

    station with a mac address 00:11:22:33:44:55 shown on wireless clients: Multiple Clients have same Mac address 00:11:22:33:44:55 I guessed it might be an issue from some of the NIC manufacturers.I am wondering what is the impact to the users on the wireless network will be? If two users have the...

    Truth5 pointsBadges:
  • Toshiba Laptop (wireless – netgear router) Windows Vista to print to Gateway desk top Windows XP with HP Laser Jet 2100 PCL6

    I have a wireless (netgear) network for my Toshiba Windows Vista laptop and I am trying to print to a Gateway desktop Window XP with a HP Laser Jet 2100 PCL6.  I have turned on the sharing for the desk top and tried to add the driver to the lap top but it said it was incompatible so I browsed the...

    Sweetie15 pointsBadges:
  • What type of wireless nic is needed for a 802.3an network

    I am setting up a lan with 10gbase-t standards. will wireless devices(tablet pcs, laptops)

    Jabaririch5 pointsBadges:
  • Wireless internet connectivity problems on Windows XP machines

    My users can connect with their laptops on our wired connection. When they go on the road and try to connect via wireless in hotels/airports etc the wireless connection connects, gives them a local IP address etc. yet they are unable to get any webpages to load. I've even had them try to use the IP...

    Major8Payne30 pointsBadges:
  • How to configure two default gateways to be 2 ISP (PIX 525)

    I have a network as follows: PIX Firewall 525 uses three network interface Ethernet1, Ethernet2, Ethernet3. E1 (10.0.0.1, Inside) connected to LAN E2 (117.16.126.35, Outside) connected to the modem (117.16.126.33) ISP1 (This address by the ISP level) E3 (192.168.1.2, Outside2) connected to the...

    Arowana200015 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following