• With both wired and wireless network connection, prefer to go wired, but metric doesn’t always work.

    When a laptop has both wireless and wired connection at the same time, we want to make sure the network traffic is going through the ethernet cable first instead of going via air. A lot of research was telling me that Windows has the preferred route to higher throughput interface. I found this to...

    springman95 pointsBadges:
  • Network issues for wireless LAN

    Hi all, I'm running a wireless LAN in my rental property. I have a monthly limit of 25 gig and 3 tenants in total. I'm wondering if there is software available to cap each IP or user to 5-7 gig per month? Obviously the cheaper the better but I don't mind paying a bit more for a user friendly...

    JoshHilder5 pointsBadges:
  • What type of wireless nic is needed for a 802.3an network

    I am setting up a LAN with 10gbase-t standards. Will wireless devices (tablet PCs, laptops) work on this?

    Jabaririch5 pointsBadges:
  • Setting up wireless network at a remote office

    When setting up my wireless network at a remote office what steps should I take to make sure it is secure and no one else can access the routers web console and change port forwarding and firewall rules? Is there a check list somewhere?

    ITKE352,565 pointsBadges:
  • Network monitoring tool to alert when the network is too saturated?

    Is there a network monitoring tool to alert me to when my network becomes too saturated and recommend what to do like spit more subnets or set up VLANs? How can I view collisions and the such?

    ITKE352,565 pointsBadges:
  • Linksys router issue

    We are a small organization using Linksys WRT54G wireless routers in a section of our offices. One router will not accept a change from WEP to WPA2. Attempts to update the firmware (in the hopes that this would resolve the issue) fail both from the external updater and from within the router...

    Pressler29042,190 pointsBadges:
  • Physical and logical design of a wireless network design for hotel

    My hotel has 50 bed rooms with 20 offices. I want to have wireless network one first floor and 1 at recreation so would you please help me how to design it?

    bikila5 pointsBadges:
  • Wireless networking in concrete building

    I am new to networking and need to know what wireless networking equipment I need to set up a business network in a concrete building (consisting of 14 floors and 173 units). A site survey was done (by a company that is no longer in business), and they assessed that I need two wireless routers...

    ITKE352,565 pointsBadges:
  • Wireless Network not working properly

    My wireless network is acting strange: I have an ACER desktop picking up the signal from my airport extreme router using wireless. However, it only shows my own network and not the other 15 networks from around the neighbourhood, like my laptop shows. Why not? Most times my computer adds the number...

    AppleAl5 pointsBadges:
  • Wireless network lease change rate

    How do I set a wireless network lease change rate to be longer?

    Eliaswharton5 pointsBadges:
  • Wireless Network With User Name And Password Login

    Hello I am looking to setup a wireless network. I want it to not have to use an authentication code but instead divert everyone who connects to it straight to a login page. I would setup a list of all user names and their passwords that I would want to be able to connect to the internet and accept...

    Greekgod18205 pointsBadges:
  • Wireless network lease span

    Hi, what happens when the lease for my wireless network expires how do I set the lease time span for my wireless network? Can I set it to infinite? I am using a TP-Link TL-WR542G wireless router. Thanks.

    Arifdelavega5 pointsBadges:
  • Upgrade existing network for wired and wireless Internet access

    I have an existing network with 1 server and 10 workstation. the server IP address is 173.201.5.1 with subnetmask 255.255.0.0 and 10 workstation with the IP address ranging from 173.201.5.2 to 173.201.5.11 with subnet mask of 255.255.0.0 I want to upgrade my existing network with out changing its...

    Flade5 pointsBadges:
  • Configuring Netgear WGT624 Router with Acer Aspire Netbook

    Does anyone know how I could go about configuring my Netgear WGT624 router to work with my new Acer Aspire netbook? I currently have a laptop operating on my Netgear router, but yesterday, when I tried to log on to the internet with my Acer Aspire netbook, nothing? my router is secured. The funny...

    NYC5 pointsBadges:
  • Testing wireless network speed

    How can I test the speed of my wireless .11N network to see if I am getting my full bandwidth? How can I increase the speed if it is slow or showing latency?

    ITKE352,565 pointsBadges:
  • One PC on my Wireless LAN cannot connect to internet

    I have a wireless LAN using ADSL. I have connected five PCs with no problem but there is one (Vista) laptop that connects fine to the router but the 'network map' in the 'network and sharing center' shows a red cross between the router and the internet. Windows troubleshooter doesn't fix the...

    Bellissimmo5 pointsBadges:
  • Connecting wireless PC to a wired network with internet

    How to connect a desktop PC to an internet connection 25 meters away from a laptop connected (wired) on a DSL (internet) modem?

    Iecep15 pointsBadges:
  • Connecting D-Link 1260 Print Server to Linksys wireless router

    I have a Linksys wireless router and it works fine - but I want to add my FP printer to my network. I bought a D-Link 1260 Print Server and connected the D-link 1260 Print Server to the printer USB port but I have very hard time connecting via Wi-Fi. Can anyone help me? I need to move the printer...

    NetworkingATE1,545 pointsBadges:
  • Health risks from Wi-Fi

    Does exposure to Wi-Fi radiation cause any health risks to children or adults?

    Antarbh0215 pointsBadges:
  • Can I connect two Windows 7 machines via Wi-Fi with no router?

    Can I connect two Windows 7 machines together via Wi-Fi without using a router? I need to copy files both ways and the only connections in common on both machines are Wi-Fi 802.11 N.

    thongtarget21485 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following