• server 2003 folder permission revert to original setting

    I have added the permission for Network Service many times to both folders C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files and C:\WINDOWS\Temp but after several hours the permission for Network Service is removed from both folders.

    Azzurri5 pointsBadges:
  • Can the Exchange ISP domain name and local domain name be the same?

    I’m looking for some assistance with designing an Exchange Server 2003 structure to replace Lotus Notes. My company has two locations, a head office and a factory. They’re 140 km apart. There are 35 users at the head office and 150 users at the factory. We have a RF-Lease Line 128 Kbps...

    Exchange Ask the Experts580 pointsBadges:
  • how can configure a roaming user in active directory

    how can configure a roaming user in active directory. and how can give the permission to a user to access a folder & files.

    Sudesh chauhan20 pointsBadges:
  • WIN2K Printing problem

    I just rebooted my Win2K server and now the printing services are a mess. All of my Standard IP Ports are gone and when I try to add a new one then print a test page it kills the Print Spooler process. Any ideas what could cause this?

    Rblackhu5 pointsBadges:
  • Exchange 2003 Not Receiving

    I have an Exchange 2003 on SBS 2003 DC. I installed Exchange and configured my MX with my Registrar, mail.dmmenterprises.net.. Now, I can send e-mails using the OWA to any e-mail address, but I cannot receive. The error is 550 No Such User. User is configured under AD Users and Exchange Mailbox is...

    Logiknetworks10 pointsBadges:
  • Trouble expanding boot disk on Windows Server 2003

    I found on SearchWinComputing.com a case were you explain how to expand a boot disk on a Server 2003 installation. I am having the same troubles and would appreciate if you could give me a hand on how to solve this problem. A technician from COM-IT in Denmark, offered me the possibility to expand...

    0 pointsBadges:
  • Outlook 2003 Email stuck in Outbox only when in Cached Mode

    have now 2 computers/users who get emails stuck in their Outboxes when they are in cached mode. They have been in cached mode for quite some time so it is not like I just changed something. Users are both using laptops with Windows XP Professional SP2 Exchange Server is running Win2003 Server,...

    Dpiccus20 pointsBadges:
  • Duplicate Active Directory account, what is -EFE?

    what is -EFE? when there is a duplicate user in Server 2003, Active Directory, one of the accounts will disable and the account logon name is switched or marked as "$DUPLICATE-EFE". What does the attribute or flag "-EFE mean?

    IT SIMON65 pointsBadges:
  • Windows 2003 Datacentre 32 bit with Oracle 9i 32 bit

    We have procured an application for archiving of reports. Initially we were suggested to go for Windows 2003 ENterprise edition 32 bit (R2) with Oracle 9i 32 bit. After about 1 year of rolling out, we found that application became very slow. To enhance the room for memory, we went for memory...

    KGA5 pointsBadges:
  • We use SBS 2003 R2 and clients with either Win XP Pro or Vista Ultimate. Furthermore it has multiple PDAs with either Win Mobil

    We use SBS 2003 R2 and clients with either Win XP Pro or Vista Ultimate. Furthermore it has multiple PDAs (All HTC TyTn I of II) with either Win Mobile 5 or 6. The problem is that some users need to use multiple mail accounts on different domains. Eg user1@domain1.nl, user1@domain2.com The POP3...

    ITKE342,185 pointsBadges:
  • Exchange 2003 I need to setup an additional (third) domain name for our client in Exchange for email purposes only. I setup the MX record to point to the mail server

    I need to setup an additional (third) domain name for our client in Exchange for email purposes only. I setup the MX record to point to the mail server. Then what is the best way to configure the exchange server for this new domain? Do I need to add a new SMTP connector?

    Juke5 pointsBadges:
  • IBM DS4300 SAN Storage Acceptance document

    Hello there, I was wondering if somebody could provide me with some guidance in preparing an acceptance document for the installation of a Fiber Channel SAN storage based on an IBM DS4300. This will help me ensure that the installation is fully implemented and all the features are enabled and...

    Akouider0 pointsBadges:
  • Active Directory setup with Exchange Server change email address for bulk mailings

    I have AD setup with Exchange Server. A few users are set up with multiple addresses for inbound mail. All outbound shows only the primary email address. I have one user who would like to be able to specify the address showing on outbound mail. Normally her address will show as user@abc.com. When...

    ITKE342,185 pointsBadges:
  • Installing oracle 9i

    is it possible to install qracle 9i on a windows 2003 environment

    Rr2424185 pointsBadges:
  • connect:direct – create a new Windows Folder on the SNODE

    I've been requested to send a set of files from MVS to a Windows Server each month. Each set of files is to be created in a new dated, say, RRSyymm, Folder. It's expected that some connect:direct specification will be able to create a new Folder each month on the destination Server. Can / How do I...

    Johnc15 pointsBadges:
  • How to generate mail address into lower case

    Hello, Since in my Active Directory user's Surname and Name has the initial in uppercase, the mail address policy generates a new address like : JDoe@contoso.com This format is unesthetic for the personn who receive the mail coming from my mail system How can I force the address policy to make only...

    Csa5 pointsBadges:
  • When Exchange Server was DC secondary, RPC Over HTTP service was working fine, but now not because i have problems with trust certificates.

    My Exchange Server was working as a DC but i had many problems with this configuration. For solving these problems i decided to remove the DC configuration over Exchange Server using dcpromo command. When Exchange Server was DC secondary, RPC Over HTTP service was working fine, but now not because...

    ITKE342,185 pointsBadges:
  • Data from UNIX Server to Windows NAS

    Being less familiar with UNIX/NFS, what would be the best method/protocol/command to move a large amount of user data from a UNIX Server to a Windows 2003 based NAS. Is there anything I should lookout for? Thank you

    GWASolutions0 pointsBadges:
  • Would like Windows 2K Print Server to print the Date on each Page that it prints

    I have a Windows 2000 Server that I use as a Print Server for many Printers. I would like a way to have just one of those printers always print the Date on every page it prints. Do any of you know how to do this or know of any special software that will do this?

    DJMike10 pointsBadges:
  • How to migrate the Exchange 2003 database to fifferent domain

    Dear all, maybe this will sound silly, but i really need an answer, i run Exchange 2003 on Windows 2003 STD Server under mydomain.com, and i want to copy, backup, migrate, call it whatever you want the database (everything in exchange, mailboxed, sores ....) to mynewdomain.com. What is the best way...

    La2em15 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following