• user cals for windows server 2003

    I purchased 25 more user cals for windows server 2003 to bring them up to 75 users from 50. I went to add the license, but it is setup as per user or per device. If i try to setup to add 25 more users per server, it gives me a warning that will violate the license agreement that allows for a one...

    Tomtek207115 pointsBadges:
  • ADS running 2000-clinet join from another NW

    ADS running 2000 I can join clinet from the newtwork which in the ads locates but I couldnot login froma different netwrk suas 192.168.2.0.Theis nws is routed with a hardware.and configured wins and DNS properly and I can ping to the domain by dc1.domain.local and can see the systems through UNC by...

    sumeshbnr1,675 pointsBadges:
  • Domain account password change Windows Server 2003 cluster

    I have a domain account with elevated privigagess. When changing a password on a Windows 2003 Active/Passive cluster do you have to use cluster.exe? or can this be manually done?

    ITKE342,605 pointsBadges:
  • LAN acces restriction for laptops on Windows Server 2003 domain

    Is there any way on a Windows Server 2003 domain to prevent unknown laptops from accessing the local LAN without needing to use third party hardware and software?

    JimmyIT1,725 pointsBadges:
  • Windows Server 2003 ISASS.EXE System error

    I recently removed and re installed my hard drives from my HP server running windows server 2003 and when i restarted the server i received the following message ISASS.EXE - SYSTEM ERROR Security accounts manager initialization failed because of the following error: directory service cannot start....

    ITKE342,605 pointsBadges:
  • Windows 2008 Terminal Server gateway

    Can I have windows 2008 TS gateway server on one server with windows 2003 terminal server on another server ? Will I lose any features if the terminal server is windows 2003?

    ITKE342,605 pointsBadges:
  • Windows Server 2008 Domain controller adprep error message

    I am running Windows Server 2008 Domain Controller. I am trying to run a “adprep /rodcprep” command, but get the following error message. “Adprep could not contact a replica for partition DC=DomainDnsZones"

    ITKE342,605 pointsBadges:
  • Vista cached credentials

    A user brought a laptop and it was joined to our 2008 windows domain, i set him up with admin rights on his user account. He logged in just fine and did training. He know is trying to log in to his previous domain using his username and password. He gets username or password error. He is using...

    Broberson10 pointsBadges:
  • Remote Acces at one site

    I have 1 site out of 82 that cannot access the notes server by either internet or via the external ip address. They have no trouble getting on the internet. It started out of the blue on Monday

    Billwelsh5 pointsBadges:
  • configuring a mail server using windows sbs and microsoft exchange step by step

    where i can find a file discribing how to configure a mail server using windows sbs and microsoft exchange step by step for only five users  

    Karampcg5 pointsBadges:
  • Need to change DNS server IP address

    Does anyone have a script that will allow me to change the dns server ip address of all my workstations automatically?

    ITKE342,605 pointsBadges:
  • Force logon to domain controller windows server 2003

    Is it possible to force logon to the same domain controller each time?

    ITKE342,605 pointsBadges:
  • outgoing https request being blocked

    Hello, At my office I am noticing that a particular website which I used to be able to login to has done some upgrades and I no longer can access it. I have tried multiple browsers but I think the problem is in the ISA firewall on the server. The site starts as a http://blahblah:8088/blah then when...

    Adambeazley0 pointsBadges:
  • Moss 2007 installation on Windows Server 2008 R2 erro

    I am trying to install moss 2007 on a windows server 2008 R2 and i have encountered the following error message This program is blocked due to compadability issues" Has anyne encountered this or have a workaround?

    ITKE342,605 pointsBadges:
  • Renaming domain in Exchange 2007? Is it possible?

    We are adding some windows server 2008 domain controllers and i would like to rename the domain while doing this but i have read that exchange 2007 does not support renaming. Is there a work around to do this? Has anyone accomplished this before?

    ITKE342,605 pointsBadges:
  • Radius Authentication of Wireless APs

    I have several wireless access points that I want to deploy in our organization. I have a windows domain and active directory 2003 and I want the athentication to be this way. Can anyone advice me on what radius server I can use and what kind of wireless security to configure., and the basic steps...

    JuneC155 pointsBadges:
  • MCSA Exam 70-291 Questions

    I am about to retake the 70-291 exam for Microsoft. And I had a question that I thought you guys may be able to answer. Do the questions rotate or do they generally stat the same. I was pretty close on the last take. It was the first one I did not pass on the first try and was pretty bummed. I was...

    Woodrow2220 pointsBadges:
  • run bat file

    I need to deploy a batch file 123.bat to collect system information to a server in my network.And want to run this bat file on a daily basis at a particlual time .I can simply create a user logon script for this .but my problem is we have more than 200 systems and normlly the users didnt shutdown...

    sumeshbnr1,675 pointsBadges:
  • MS Exchange on Server 2000 one user can receive but not send mail

    One of my users reported that he is not able to send e-mail from his Outlook client.  I sent test messages from his Outlook client to both an internal and external address and did not receive eitehr message.  I sent him e-mail from both my internal and external e-mail addresses and they went...

    Mryansimonovich30 pointsBadges:
  • Data Guard implementation for Oracle 10gR2

    I am making a standby database for dataguard on 10.2.0(windows 2003 VmWare) following this tutorial. I am confused about the standby database creation. I successfully configured the PD with these steps, but I simply ran the oradim command for the standby databae creation then mounted the database...

    ITKE342,605 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following