1
  • Cisco Access Point: Wireless client is disconnected

    We have 21 Access Point in field in our company location. all are working and having the Good configuration along with channels and security authentication. But now a days we are facing problem with 3 access points where wireless client in one VLAN is not associating  and there is no problem in...

    Ekansh400 pointsBadges:
  • connecting the 5th and 7th floosr of a building

    Hi, Everybody My network covers the 5 th floor of an office building, and now we expanding to the 7th floor (a half-dozen users. All the servers and telecom closet are on the 5th floor and I have to provide network services to the users on the 7th floor. I would like to have the opunion of this...

    Senomango0 pointsBadges:
  • Wireless Access Point

    My Organisation is looking for some software or a way to monitor our open wireless network. We have a few access points spread around the building and we woud like a method of tracking and keeping a record of IP addresses leased and associated Mac addresses for at least 10 days.  Any suggestions...

    Barcagunner5 pointsBadges:
  • SonicWALL Sonicpoint-N 11A/B/G Dual-Band bundled with Poe injector

    what brand is comparable to this exact model or hopefully much better

    Srigoroso35 pointsBadges:
  • Level 1 WAP 1001 Outdoor units

    I have a situation where i have linked two warehouses with separate level 1 WAP 1001 outdoor units. one acting as an access point and the other as a client. The client is connected to a dlink switch that then feeds two dumb terminals and CCTV DVR. The Access Point is connected to another DLink...

    FintanM5 pointsBadges:
  • AP-5131 WAP RADIUS Configuration?

    I am in the process of helping my boss apply some basic security to our current WLAN. The company has not applied security to this point since the information we have is not really that confidential and we are in a cynder block building which kills most of the signal before it even leaves the...

    erin0201215 pointsBadges:
  • wap application

    how do i create a mobile/wap application?? the main function of the application would be unlimited sms to any destination..but i would like the application to have a center number (ie. people using the application simply use that center number to send receive texts so they do not have to connect...

    Mlibra25 pointsBadges:
  • How to redirect WWW to WAP

    Hi, would anybody help to understand of how to redirect www site to WAP site when navigating via mobile internet connection

    Arthurmasons5 pointsBadges:
  • connecting wireless PC to a wired network with internet

    how to connect a desktop PC to an internet connection 25meters away from a laptop connected(wired) on a DSL(internet) modem?

    Iecep15 pointsBadges:
  • Access Point issues netgear WG302 Access point

    I have a netgear WG302 Access point that is giving me a headache. I can configue it and it will work fine, until my isp changes the ip address. Then I have to reconfigue it again. I have tried static routing options through the router hoping this would fix the problem. no luck. (It may have been...

    MK1000015 pointsBadges:
  • WAP Interferes with Network Switches

    Recently I got a new PoE outdoor wireless access point. When attempting to configure the device in my office for the first time, everything seemed ok. When I deployed the unit inside the building to test it, I noticed several network switches including the one it was connected to acting up and...

    Schmidtw11,330 pointsBadges:
  • Changing Duplex on a POE Cisco 1231 WAP

    On a network I am working on I have a Cisco 1231 WAP that is powered via POE. The Duplex is currently set as "Half", while the rest of the WIFI network (3 more 1230 series WAPs) is set as "Full". This is causing the device to throw an error once per second. All the WAPS, including the half duplex...

    Flame14,925 pointsBadges:
  • Network Topology Help

    Currently, I am in the process of reqiring our entire network. Previously, this organization has had the 7th floor switches pour into the 6th, the 6th into thr 5th, and so on and so forth until they got to the main backbone and into the server room. I am converting this into a star topology, giving...

    Schmidtw11,330 pointsBadges:
  • Wireless Camera Network Hopping

    Recently I installed a wireless network camera in a plant elevator. I am getting a relatively good signal but it jumps ever so often and reduces frame rate to about 1/5th of what it should be. The wireless network in the building spans 8 floors and is a single SSID being broadcasted. The make up of...

    Schmidtw11,330 pointsBadges:
  • How to establish Wireless Networking in a Hotel

    Hello, I am new in Wireless Networking and i have to implement Wireless Internet in a hotel which has rooms on two floors. I understand that i have to put WAPs in different locations in hotel. But i want that laptop users not need to connect to WAP individualy as the move around. Once the laptop is...

    Shershah77205 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following