IT Answers » VPN Client

Authenticating server access

Connectivity1 — Fri, 30 Mar 2012 09:18:12 +0000

New Answer by TomLiotta

VPN client access GRE tunnel

Jmf55 — Wed, 04 May 2011 12:37:49 +0000

i have two cellular modems that have a gre tunnel between them. i have vpn client connections to each modem to access each lan however i would like to be able
to access remote lan (via gre tunnel?). is this possible?

How to configure ASA 5510 with dynamic IP address

Cicso — Tue, 02 Nov 2010 11:42:52 +0000

I want to configure the Cisco ASA 5510 with my ADSL connection.
Adsl conection getting the dynamic IP address from ISP so how can i configure the ASA so i can use site to site connection and vpn client.
On site also having ASA 5505 and pix 506 with ADSL connection.
Office user also wants to connect to head office via vpn client.

Thanks in advance..

Cisco ASA Anyconnect Setup

Miselw — Thu, 05 Aug 2010 14:44:25 +0000

We are trying to connect HTC Touch Pro 2 devices to the VPN which is Cisco ASA. I am getting the following error on the device:

The Anyconnect package on the secure gateway could not be located. You may be experiencing network connectivity issues.

How to automatically configure Windows PPTP VPN Client?

Asif012005 — Wed, 24 Mar 2010 08:43:40 +0000

VPN, PPTP, Windows PPTP VPN Client, VPN configuration

Central Router to assign the same IP address to the VPN Clients

ITKE — Thu, 15 Jan 2009 15:50:43 +0000

i have several PCs connecting to a central site router using the VPN
Client and different media (DSL, ISDN, UMTS).

I would like the central router to assign the same IP address to the
VPN clients each time they connect again to the central site.

So far I have an IP pool configured on the central site router, but
this assigns a different address each time a client connects.

connecting to VPN using MS VPN Client

Jasonmichel — Mon, 03 Nov 2008 21:16:53 +0000

Ok..i have a 1841 router with 12.4(19) and we use MS VPN client to connect to one of our clients. If i use from home, it works fine and a couple other sites it works fine, but at the office behind our 1841 router it doesn’t. Talked to the clients firewall service providers and they said it uses GRE over IP sec? not sure if i need to open pptp or something to allow return packets through.. What info can i give you guys that will help you help me? It contacts the site, gets to verifying user/pwd and then fails