• priority queuing

    Why is priority queuing not recommended for anything other than VoIP?

    Rgaz115 pointsBadges:
  • Changing RNPG on a Nortel CS 1000

    We Recently installed a Nortel CS1000. Can anyone tell me what load (i.e ld 20) in the virtual system terminal and the command sequence to change the call pickup group (RNPG)?? everything seems to be ok in the GUI interface for these extensions, but I'm finding a lot of times the gui changes don't...

    Crookedlake20 pointsBadges:
  • What will make an analog signal?

    Does the communication between two network interface cards (NICs) of a computer connected by a Cat 5 cable in a digital signal form or an analog signal?

    NetworkingATE1,545 pointsBadges:
  • Skype on company equipment & networks

    As is true with most organizations today, we are under pressure to reduce costs where we can. Some users are coming and asking why we are not using Skype for international calling. I'm not sure if I fully understand the risks so I am posting this question here on ITKE. Has anyone implemented Skype...

    Labnuke9932,960 pointsBadges:
  • Telecom BSS question

    Telecom BSS related ques: For cascaded 1800 BTS with master 900 BTS,if 900 master BTS is down for its own equipment fault,cascaded slave 1800 BTS gets down/stop carrying traffic without any fault as BCCH and other controllong channels are in master 900 BTS.Is there any technology/system to turn the...

    Arif5 pointsBadges:
  • What should our next contest be on ITKnowledgeExchange.com?

    We want to kick off the new year with an exciting contest and want your input. We have done a variety of contests from the top 3 Knowledge Point earners winning prizes like an XBOX 360. Also we have had Amazon.com gift cards for the top 10 point earners who achieve over 500 Knowledge Points. I want...

    ITKE345,295 pointsBadges:
  • Cisco Unity Switch Data

    Is there a way to pull the phone data off of a Cisco Unity Switch without a specific Unity server?

    Roberthjr5 pointsBadges:
  • Block of DIDs

    What LD do I use to determine what my block of DIDs are? I have a Meridian, Option 11c switch. Thank you

    Whatspbx5 pointsBadges:
  • VoIP with Skype and Verizon Wireless AirCard

    i have a verizon aircard for my laptop and i also have skype internet phone service. if i buy a skype phone how does it work with my internet connection and do i have to be connected to the internet on my computer to have service on the phone?

    Nannycathy5 pointsBadges:
  • Avaya Witness Contact Center

    I have been given access to the Avaya Witness Contact Center. I am able to generate some queries but when I try to download the results I am only able to download 10 pages at a time. Is this my place of work setting? or is there a way to set a larger download set ? I am generating my data through...

    Rcsully6515 pointsBadges:
  • How to confiqure QoS in Cisco 6500 Switches

    Dear Friends, I am planning to configure QOS in our network which comprises of Cisco 6500 Series Swicthes as Core/Distribution and Cisco 3560 Switches as Edge Swicthes. We don't have any IP telephony services. Please let me know the sample configurations.

    Yasir Irfan5,535 pointsBadges:
  • Cisco CallManager upgrade from 4.X to 6.1

    I want to upgrade my Cisco Callmanager version from 4.1 to 6.1.My server is HP Compaq Proliant GL320 G2.I upgraded my server 2*80GB HDD and 2GB RAM.Buy I have error Grub Loading Stage 1.5 Grub Loading please wait.... Error 21 when I installed 6.1 DVD. Can you help me for this problem. Thanks,

    Ipttrc5 pointsBadges:
  • CTI Vendor Agnostic

    It is my understanding that you can develop your middleware to accept a Genesys CTI solution and then make it agnostic to a call centers solution. Is this correct?

    Bv225 pointsBadges:
  • Switching ISPs and need help reconfiguring VPN and Firewall settings

    When switching from DSL to Cable Internet... when you have a router w/VPN & Firewall and a static IP - how do you switch the service? Obviously just plugging the new service provider in won't work. I know you need the log in and password to the router but after that?

    NetworkingATE1,545 pointsBadges:
  • SFP module and Optical Fibre Cable

    HI TO ALL...I WOULD LIKE TO ASK THE FOLLOWING QUESTION. I HAVE A 48 PORT HP PROCURVE SWITCH THAT NEEDS TO BE CONNECTED WITH A 24 PORT HP PROCURVE SWITCH USING A GIGABIT SFP MODULE.THE OPTICAL FIBRE PATCH CABLE IS 62 AND A HALF MULTIMODE SC-LC CONNECTOR TYPE CABLE.THE SFP MODULE HAS A TRANSMITTING...

    Kaktrap5 pointsBadges:
  • Configuring MS Exchange 2003 for SBS to send and receive mails on internet

    Hi, I have installed exchange server 2003 for SBS. I have configured it. Its working fine on Lan. I can send and receive mails from AD users. Now I want to send mails outside the network on internet. I have domain registered with godaddy (www.coinopsolutions.net). I have router working as DHCP...

    Kavinagpur10 pointsBadges:
  • Cover Answer Group

    If one of the members in the cover answer group is on a call shouldn't the rest of the phones in the group ring before the call goes to point 2 of the cover path?

    Teleguy5 pointsBadges:
  • good email and colaboration suite

    I'm looking for a new email software package web based we use pop 3 outlook and need a colabsuite snap in for outlook with a good antispam program currently using ipswitch but have many problems any suggestions anybody use icewarp and if so how is it? any suggestions appreciated

    Pcspecialistallied20 pointsBadges:
  • How to configure SIP server in Cisco 3660 router?

    I'm not able to configure SIP server in Cisco 3660 router (IOS is 12.4T). Can anyone please tell me how? Thank you.

    NetworkingATE1,545 pointsBadges:
  • How to configure VPN with Cable Internet?

    I was able to connect to the VPN using wireless Internet but this Internet access is no longer available to me. I have now subscribed to Cable (LAN) Internet. VPN is not working in this. Could someone step me through how to set up VPN with cable Internet? Thanks.

    NetworkingATE1,545 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following