• Customer controlled call forwarding

    How do I set up customer controlled call forwarding on a modular plus with ISDN 2E lines?

    Ukcomms5 pointsBadges:
  • Cisco ARC Council

    Hello, Does anyone know how to transfer a call directly into voicemail (without ringing)using the ARC council?

    Jimshoe12110 pointsBadges:
  • Call Manager 5.1 Timeout

    Using CM 5.1, when I dial a number from my 7960, 7961, or 7970, it times out really fast and goes to a fast busy. For example, if I dial 630-555-1212, but dial too slow, my call goes to a fast busy after a few seconds. Any ideas on how to increase this time to more like 15 seconds?

    Jimshoe12110 pointsBadges:
  • Display inbound caller ID on 2nd line appearance

    CCM 6.1 - Currently if a call is in progress on 1st line and a second call comes in, I can not see the caller ID of the second call that goes to the 2nd line appearance. For example Line 1 is in use and set to forward if line is busy. Second call comes in and goes to 2nd line as expected. Recieve...

    Sullida25 pointsBadges:
  • CallManager and SQL Queries

    I need to gather some data from our call manager and the reporting tool that comes packaged with the server is horrible! We have Call Manager version 6.1. Is there anyway query the call detail records other then using the reporting tool? If so, please advise me. Thanks

    Jlandon5 pointsBadges:
  • window server 2000 call manger

    Is it possible to remote in on a windows 2000 server call manager from a Win XP station?

    1RetiredArmyguy5 pointsBadges:
  • Which certification would you suggest for a network admin in a telco?

    I am an assistant network administrator in a telecom company, and I want to earn some certifications. I now have a MCP 2005. Which track should I choose next? And how can I start studying for that?

    NetworkingATE1,545 pointsBadges:
  • Certification for NGN systems?

    I am working for a Telecom company as a NGN technician. So, our softswitch have been using the Sun server. I would like to become an expert with this equipment, that's why I've decided to attend a SCSA on Solaris 10. My question is: Which are the appropriate courses I should take to become an...

    BrentSheets6,925 pointsBadges:
  • Putting another extension on a 3904

    I am trying to put another users extension onto an existing users phone. The problem I am running into is that the extension now rings on both phones. I do i get it to just show up without ringing?

    Jlovullo5 pointsBadges:
  • AudioCodes MP-118 FXO

    Does anyone have MP-118 FXO config file since I am getting wrong call duration with my file.It takes the ring time into call duration.You can contact me at santosh_tripathi@datamatics.com

    Santro47065 pointsBadges:
  • Cannot ping default gateway of ISP

    Can Anyone help me that why i can not ping default gateway address 96.52.160.1 I am kind of frustrate that it looks everything OK to me but since last one week day and night i am trying to figure out that why it can not ping ISP and neither can open webpage (DNS are entered correctly)...

    Successful5 pointsBadges:
  • Voice mail zero out configuration on Cisco IP Phone

    how to configure nortel phone number as voice mail zero out on cisco ip phone number

    Ccmadmin5 pointsBadges:
  • Circuit Cards

    Which circuit cards require 2 card slots in a CS1000

    Vt335 pointsBadges:
  • QoS on my cisco 3620 router for my VoiP traffic

    I am wanting to enable QoS on my cisco 3620 router for my VoiP traffic. I believe this can be done using ACL's instead of SDM. Does anyone have any info?.

    ITKE350,945 pointsBadges:
  • Avaya programing

    How do I make a phone not ring and disturb a person at their desk when all of the phones ring with incoming calls?

    Kellyspin5 pointsBadges:
  • Cisco IP phone issue

    We are on the CUCM 6.1 - I have a phone where the vm light and prompt is not working. I don't believe it's the phone because I rebuilt a new phone and am getting the same issue. The other phones at her office do have this issue and each one is setup the same. Is there something outside of the phone...

    Cknafick160 pointsBadges:
  • Getting proper caller ID to display while using a combination of Avaya S8700 with outbound ISDN trunks, connected to a Cisco Call Manager via Qsig PRI

    While making a call originating from the Cisco Call Manager, I can only make the main number of the Avaya PBX display, not the direct number of the station on the Cisco Call manager, how do I make the direct number display?

    CrowleyCisco5 pointsBadges:
  • Change Nortel S8000 from Three-phase to Single-phase power

    We have just purchased 50 nortel gsm s8000 frames from europe. these frame are set up to use three phase power. We need them to be single phase power. is it possible to make this change and if so how. Or where would I find this information? The 3 phase power unit is part number NTQA90CD The single...

    Dcfour910 pointsBadges:
  • testing SIP vulnerabilities

    I want to prove SIP vulnerabilities using SiVuS (The VoIp vulnerability scanner ) tool. The test Bed contains Asterisk server and two xlite clients. When Two xlite clients are registered with server. I am able to Remove their registrations from server by generating REGISTER SIP messages using SiVuS...

    Sindhukakuru30 pointsBadges:
  • sip attacks

    I want to test SIP vulnerabilities using Sipp Message generating tool. i have XML files for generating messages. I have sipp running. But i am not able to execute below command. Run sipp with embedded server (uas) scenario: # ./sipp -sn uas Can i get any help. Thank you Regards Sindhu

    Sindhukakuru30 pointsBadges:

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following