1
  • What equipment would you recommend for VoIP termination for cellular networks?

    I live in a "developing" nation and there is a good market for VoIP termination to the local cellular networks. I have dedicated bandwidth (frame relay) to bring traffic in, a couple of Quintum AX4800 Tenor-S gateways with patch boards, but need to acquire some good GSM channel banks to complete...

    Unified Communications ATE2,185 pointsBadges:
  • FreePBX in the Cloud

    Has anybody installed FreePBX in the cloud or on a remote shared hosting server?

    Bestchoiceholidays5 pointsBadges:
  • VoIP voice quality differences

    I am trying to commission a network of Cisco Call Manager Express systems with (mainly) Cisco 521 phones connected to a private IP network for a corporate client. Prior to the "proper" solution being introduced a temporary solution using Asterisk with Grandstream GX-2000 phones was installed to...

    Vendome15 pointsBadges:
  • VOIP over leased line

    Can we run Voip over leased line instead of PRI

    Ekansh400 pointsBadges:
  • What’s the best way for me to make the switch to VoIP in a small office?

    I'm looking to move away from the landline in our small office and port the number to a VoIP, Internet-only phone service. I'd like to have just one number and be able to call a few different extensions around the house. Would a few of the Cisco 7960G Unified IP Phones do the job? What else would I...

    ITKE346,360 pointsBadges:
  • VoIP Software necessary to build our own

    Dear Sir , We want to run VOIP service software  business like smart voip , net4india, etc .. So in order to do this business what are the software and tools we need to develop by our own . please guide us regards ksr

    Ksr1234320 pointsBadges:
  • How to set up a VoIP switch network

    I am presently terminating voip traffic through another company to an African country. Can someone please advise as to what hardware,software and bandwidth etc I would need to set up my own voip switch in order to terminate 1-10 million minutes a month. Cheers Zee

    Zee135 pointsBadges:
  • Equipments needed for VoiP Business??

    Hello,  My name is Adam, I am interested in building a business that would allow customers to make an unlimited international calling to a chosen country (cellphones and landlines)..   Basically, I want to provide an unlimited calling to certain countries with a monthly flat fee.  customers...

    Shoreseattle5 pointsBadges:
  • Call Manager Overhead Paging using a 2610 Router

    Hi all, I need help to config a speedial number to dial a 2610 router I have setup for E/M signalling for overhead paging. Thanks

    Cisco56235 pointsBadges:
  • VoIP

    [strong]I WANT TO KNOW HOW TO CREATE A VOIP SOFTWARE AND VOIP SERVER ?? AND I WANT TO KNOW THAT HOW A VOIP SERVER WORKS ? CAN WE CALL FROM COMPUTER TO MOBILE PHONES TO ANY PART OF THE WORLD TO THAT VOIP SOFTWARE?? IF OK WAT ARE THE PROCEDURES FOR THAT? I WANT TO KNOW MORE AND MORE DETAILS ABOUT...

    Diil15 pointsBadges:
  • UC solutions: Show and tell

    As Tony Bradley frequently emphasizes on his blog Unified Communications: Click to Talk, there are many benefits, cost and otherwise, to implementing UC solutions within your organization. I want to know -- are you using UC? What product(s)? How has your experience been, and why did you make the...

    JennyMack4,280 pointsBadges:
  • DSL service to 2811 router

    Can a DSL service provide voice to Cisco 7961 phones through a 2811 router?

    DGJ5 pointsBadges:
  • I’m searching for a large scale SIP based analog/IP convertor

    We are deploying a large scale VoIP system (+/- 5000 phones), based on Asterisk and SIP. In some of our warehouses we want to keep using the existing analog phones. We have 2 options (that we know of) to connect these analog phones to our VoIP system: 1) Linksys SPA2102 analog/IP convertor...

    Johan Leroy5 pointsBadges:
  • Need help with VoIP decision using Cisco products

    I need to configure and set up a VoIP solution for my company, the only caveat being that I must use only Cisco products. We have about 70 users and a LAN already implemented with QoS. Where do I begin, and what should I consider when making decisions about this impending deployment?

    Unified Communications ATE2,185 pointsBadges:
1

Forgot Password

No problem! Submit your e-mail address below. We'll send you an e-mail containing your password.

Your password has been sent to:

To follow this tag...

There was an error processing your information. Please try again later.

REGISTER or login:

Forgot Password?
By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Thanks! We'll email you when relevant content is added and updated.

Following